代表性论文专著
著作:
[1] 林忠钦,李淑慧,于忠奇,蒋浩民,汽车板精益成形技术(国家自然科学基金研究专著),机械工业出版社,32万字,2009年,I S B N:9787111262299, 2010中国机械工业科学技术一等奖(著作类)
[2] 林忠钦,李淑慧,朱亚群,《车身覆盖件冲压成形仿真》 , 机械工业出版社, ISBN9787111152019,2007上海汽车工业教育基金会优秀著作一等奖
[3] 裴瑞琳,李淑慧,张延松,电机用电工钢,(英) Philip, Beckley著,上海交通大学出版社 2018.3 (译著)
2024:
HAN G F, HE J, LI S H., LIN Z. Q. Simple shear methodology for local structure-property relationships of sheet metals: state-of-the-art and open issues [J]. Progress in Materials Science, 2024, 143: 101266. (IF: 37.4, 中科院1区)
Ziyun Huang,Shun Liu,Sun jin,Shuhui Li,Identification of forming performance parameters for 6016 aluminum alloy sheet under different strain paths via digital image correlation technology, International Journal of Advanced Manufacturing Technology, 2024
Bin Gu, Bin Feng, Yutong Qi, Shuhui Li, A comparative study on cryogenic formability and paint baking property of AA7075 alloy sheets tempered at fast retrogressed and pre-aged conditions, Journal of Materials Research and Technology, 2024, 30: 5232–5248
2023:
[80] Bin Feng, Bin Gu**, Shuhui Li*. An efficient pre-hardened cryogenic forming process for AA7075 aluminum alloy sheets, Journal of Manufacturing Processes, 2023,(92):534-547
2022:
[79]Bin Feng, Bin Gu**, Shuhui Li*. Cryogenic deformation behavior and failure mechanism of AA7075 alloy sheets tempered at different conditions. Materials Science and Engineering A, 2022, 848:143396.
[78] 陈源,李淑慧,李永丰,林忠钦*. TA15 钛合金应力松弛行为宏微耦合本构建模 [J]. 机械工程学报, 2022(6):64-74
[77] 张渤涛,李淑慧,李永丰,韩国丰,应力三轴度对淬火态硼钢氢脆敏感性的影响,材料研究学报,2022, 36(10): 739-746.
[76]Han, Guofeng; He, Ji*; Li, Shuhui. Simple shear deformation of sheet metals: finite strain perturbation analysis and high-resolution quasi-in-situ strain measurement[J]. International Journal of Plasticity, 2022, 150: 103194.
[75]Li, Yongfeng*; Li, Shuhui*. Deep learning based phase transformation model for the prediction of microstructure and mechanical properties of hot-stamped parts[J]. International Journal of Mechanical Sciences, 2022, 220: 107134.
2021:
[74] 张云光,李志强,王耀奇,李淑慧,李永丰,2060铝锂合金冷模热成形界面换热系数确定的实验与算法,航空学报 ,2021,2(42):359-369
[73] Yongfeng Li, Yuan Chen, Shuhui Li*. Phase transformation testing and modeling for hot stamping of Boron steel in consideration of the effect of the prior austenite deformation. Materials Science and Engineering A , 2021,818,141447
[72] Yongfeng Li*, Yunguang Zhang, Shuhui Li*. Viscoplastic constitutive modeling of boron steel under large strain conditions and its application in hot semi-cutting, Journal of Manufacturing Processes, 2021,66: 532-548.
[71] Zhang B T, Li S H*, He J. Effects of prestrain and inner stress on the susceptibility of hot stamped boron steel to hydrogen embrittlement [J].Metallurgical and Materials Transactions A, 2021, 52: 2314-2330.
[70] Zhang B T, Li S H*, Li Y F. Numerical approach for predicting hydrogen diffusion in dual-phase hot stamped boron steel with hydrogen embrittlement [J]. Journal of Materials Research and Technology, 2021, 15: 4048-4063.
[69] Yongfeng Li*, Shuhui Li*, Yuan Chen, An extended linear method to evaluate the viscoplastic behavior of boron steel at large strain with full-field measurements, International Journal of Solids and Structures, 2021(224): 111049
[68] Yuan Chen, Guofeng Han, Shuhui Li*, Zhiqiang Li, Zhongqin Lin. Time-dependent springback prediction with stress relaxation effect for non-isothermal hot stamping of titanium alloy sheets. The International Journal of Advanced Manufacturing Technology, 2021, 115(1), 637-653.
[67] Yuan Chen, Shuhui Li*, Yongfeng Li, Yaoqi Wang, Zhiqiang Li, Zhongqin Lin. Constitutive modeling of TA15 alloy sheet coupling phase transformation in non-isothermal hot stamping process. Journal of Materials Research and Technology, 2021, 12:629-642.
[66] 安剑,李永丰,张云,李淑慧,热冲压条件下2219铝合金的本构行为测试与建模,机械工程学报,2021,57(4): 44-52.
2020:
[65] Guo C, He J, Su YH, Li SH, Thermo-stamping co-curing process for CFRP/steel hybrid sheets and its interface strength improvement, COMPOSITE STRUCTURES, vol.241, 2020
[64]Ronggao Cui,Shuhui Li*, Pulsed Laser Welding of Laminated Electrical Steels, Journal of Materials Process Technology, 2020, 285: 116778
[63] Ji He, Shuhui Li*, Liang Dong, Experiments and FE simulation of edge cracking considering prehardening after blanking process, International Journal of Material Forming, 2020,13 (4):547-560
[62] Gu B, He J*, Li S, Lin Z. Anisotropic fracture modeling of sheet metals: from in-plane to out-of-plane[J]. International Journal of Solids and Structures, 2020,182:112-140
2019:
[61] Yongfeng Li, Shuhui Li*, Yuan Chen, Guofeng Han, Constitutive Parameters Identification Based on DIC Assisted Thermo-mechanical Tensile Test for Hot Stamping of Boron Steel, Journal of Materials Processing Technology, 2019, 271: 429-443.
[60] He Ji, Wang Zhe, Li Shuhui*, Dong Liang, Cao Xudong, Zhang Weigang, Optimum clearance determination in blanking coarse-grained non-oriented electrical steel sheets: experiment and simulation, International Journal of Material Forming, 2019, 12(4):575-586
[59] Gu DD, Du L, Dai DH, Lin KJ, Xia MJ, Li SH, He J, Influence of thermal behavior along deposition direction on microstructure and microhardness of laser melting deposited metallic parts, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, vol.125, i: 7,2019
[58] He J, Li YF, Gu B, Li SH, Effects of reverse loading on forming limit predictions with distortional anisotropic hardening under associated and non-associated flow rules, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, vol.156, 2019: 446-461
[57] Yongfeng Li, Shuhui Li*, Ji He, Yuan Chen, Lan Yue, Identification methods on blank-die interfacial heat transfer coefficient in press hardening, Applied Thermal Engineering, 2019(152): 865-877
[56] He Ji*, Guofeng Han, Li Shuhui*, Danqing Zou, To correlate the phase transformation and mechanical behavior of QP steel sheets, International Journal of Mechanical Sciences, 2019, 152: 198-210
2018:
[55] He Ji, Gu B, Li Y, Li S*. Forming Limits Under Stretch-Bending Through Distortionless and Distortional Anisotropic Hardening. ASME Journal of Manufacturing Science and Engineering 2018;140(12):121013-121013-14.
[54] Cui R , Li S , Wang Z , et al. A modified residual stress dependent Jile-Atherton hysteresis model[J]. Journal of Magnetism & Magnetic Materials, 2018, 465: 578-584.
[53] He Ji, Shuhui Li*, Shanshuai Wang, Deformation behavior of sandwich hemispherical structure under axial compression at low temperature, Composite Structures, 2018, 203: 267-277
[52] Zhe Wang, Shuhui Li *, Ronggao Cui, Xinke Wang, Influence of Grain Size and Blanking Clearance on Magnetic Properties Deterioration of Non-Oriented Electrical Steel, IEEE TRANSACTIONS ON MAGNETICS, 2018.200
[51] Shuhui Li*, Ji He*, Bin Gu, Danielle Zeng, Z. CedricXia, Yixi Zhao, Zhongqin Lin, Anisotropic fracture of advanced high strength steel sheets: Experiment and theory, International Journal of Plasticity, 2018(103):95-118
[50] Zou Danqing, Shuhui Li*, Ji He, The Deformation Induced Martensitic Transformation and Mechanical Behavior of Quenching and Partitioning steels under Complex Loading Process, Materials Science & Engineering A, 2018(715): 243-256
[49] Wang zhe, Shuhui Li*, Ronggao Cui, Xinke Wang, Weigang Zhang, Modeling of Surface Layer and Strain Gradient Hardening Effects on Micro-Bending of Non-oriented Silicon Steel Sheet, Materials Science & Engineering A, 2018(711) : 498~507
2017
[48] Bin Gu, JI HE, Shuhui Li, Yuan Chen, Yongfeng Li, Cyclic sheet metal test comparison and parameter calibration for springback prediction of dual phase steel sheets. ASME/Journal of Manufacturing Science and Engineering, 2017,139(9).
[47] Zhang YS, Wang HZ, Chen KK, Li SH, Comparison of laser and TIG welding of laminated electrical steels, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.247, 2017: 55-63
[46] Danqing Zou, Shuhui Li*, Ji He. Temperature and Strain rate dependent Deformation Induced Martensitic Transformation and Flow Behavior of Quenching and Partitioning Steels [J]. Materials Science and Engineering A, 2017,680:54-63.
[45] Shanshuai Wang, Shuhui Li*, Ji He. Buckling Behavior of Sandwich Hemispherical Structure Considering Deformation Modes under Axial Compression[J]. Composite Structures, 2017,163:312-324.
[44] Dong L, Li S*, He J. Ductile fracture initiation of anisotropic metal sheets[J]. Journal of Materials Engineering and Performance, 2017, 26(7):3285-3298
2016
[43] Wang HZ, Zhang YS, Li SH, Laser welding of laminated electrical steels, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol. 230, 2016: 99-108
[42] Dong L, Li S, He J, et al. Investigation on shearing and local formability of hot-rolled high strength plates[J]. Journal of Manufacturing Science & Engineering, 2016,138(9): 091001-091013.
[41] Shanshuai Wang,Shuhui Li,Ji He,Yixi Zhao.Asymmetric Postbuckling Behavior of Hemispherical Shell Structure Under Axial Compression [J]Journal of Engineering Materials and Technology, 2016, 138(1): 011005.
[40] Shuhui Li, Danqing Zou, Cedric Xia, Ji He. Effect of Strain Rate on Deformation-Induced Martensitic Transformation of Quenching and Partitioning Steels [J]. Steel Research International, 2016, 87(10): 1302-1311.
2015
[39] Shuhui Li*, JiHe, YixiZhao, ShanshuaiWang, LiangDong, RonggaoCui, Theoretical failure investigation for sheet metals under hybrid stretch-bending loadings[J], International Journal of Mechanical Sciences, 2015, 104: 75–90
2014
[38] He J, Zeng D, Zhu XH, Xia ZC, Li SH, Effect of nonlinear strain paths on forming limits under isotropic and anisotropic hardening,INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, vol.51, 2014: 402-415
[37] Shuhui Li*, Bo Hou, Material Behavior Modeling in Machining Simulation of 7075-T651 Aluminum Alloy[J], ASME/Journal of Engineering Materials and Technology, 2014, 136: 1-14
[36] Shuhui Li*, Ji He, Z. Cedric Xia, Danielle Zeng, Bo Hou. Bifurcation Analysis of Forming Limits for an Orthotropic Sheet Metal[J]. ASME/Journal of Manufacturing Science and Engineering, 2014, 136: 1-10.
~2013
[35] He J, Xia ZC, Li SH, Zeng D, M-K Analysis of Forming Limit Diagram Under Stretch-Bending, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, v: 135, i: 4,2013
[34] He J, Xia ZC, Zhu XH, Zeng D, Li SH, Sheet metal forming limits under stretch-bending with anisotropic hardening, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, vol.75, 2013: 244-256
[33] He J, Xia ZC, Zeng D, Li SH, Forming Limits of a Sheet Metal After Continuous-Bending-Under-Tension Loading, JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, vol.135, 2013:
[32] Hongqing Shen, Shuhui Li*, Xiaofeng Ni, G.L. Chen, A modified displacement adjustment method to compensate for surface deflections in the automobile exterior panels. Journal of Materials Processing Technology, 2013, 213(11): 1943–1953
[31] Hu X, Zhao YX, Huang S, Li SH, Lin ZQ, Numerical analysis of the roller hemming process, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.62, 2012: 543-550
[30] Shuhui Li*, Xianfeng Chen, Zhongqin Lin, Study on formability of tube hydroforming through elliptical die inserts[J], Journal of Materials Processing Tech,2012, 212: 1916-1924
[29] Dan WJ, Lin ZQ, Li SH, Zhang WG, Study on the mixture strain hardening of multi-phase steels, MATERIALS SCIENCE AND ENGINEERING A, vol.552, 2012: 1-8
[28] Chen XF, Li SH, Yu ZQ, Lin ZQ, Study on experimental approaches of forming limit curve for tube hydroforming, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.61, 2012: 87-100
[27] Shen HQ, Li SH, Chen GL, Quantitative analysis of surface deflections in the automobile exterior panel based on a curvature-deviation method, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.212, 2012: 1548-1556
[26] Chen XF, Yu ZQ, Hou B, Li SH, Lin ZQ, A theoretical and experimental study on forming limit diagram for a seamed tube hydroforming, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.211, 2011: 2012-2021
[25] Shuhui Li*, Xing Hu, Yixi Zhao, Zhongqin Lin, Nanqiao Xu,Cyclic hardening behavior of roller hemming in thStudy of tube hydroforming in a trapezoid-sectional die in case of aluminum alloy sheets[J], Materials & Design, 2011, 32: 2308-2316
[24] Wu ZG, Li SH, Zhang WG, Wang WR, Ductile fracture simulation of hydropiercing process based on various criteria in 3D modeling, MATERIALS & DESIGN, vol.31, 2010: 3661-3671
[23]Hou B, Wang WR, Li SH, Lin ZQ, Xia ZC, Stochastic analysis and robust optimization for a deck lid inner panel stamping, MATERIALS & DESIGN, vol.31, 2010: 1191-1199
[22] Hu X, Lin ZQ, Li SH, Zhao YX, Fracture limit prediction for roller hemming of aluminum alloy sheet, MATERIALS & DESIGN, vol.31, 2010: 1410-1416
[21] Shen HQ, Li SH, Chen GL, Numerical analysis of panels' dent resistance considering the Bauschinger effect, MATERIALS & DESIGN, vol.31, 2010: 870-876
[20] Xu XH, Zhang WG, Li SH, Lin ZQ, Study of tube hydroforming in a trapezoid-sectional die, THIN-WALLED STRUCTURES, vol.47, 2009: 1397-1403
[19] Shuhui Li, Xianghe Xu, Weigang Zhang, Zhongqin Lin. Study on the crushing and hydroforming processes of tubes in a trapezoid-sectional die, International Journal of Advanced Manufacturing Technology, vol.43, 2009: 67-77
[18] Zeng G, Li SH, Yu ZQ, Lai XM, Optimization design of roll profiles for cold roll forming based on response surface method, MATERIALS & DESIGN, vol.30,2009: 1930-1938
[17] S.H.Li, G.Zeng, Y.F.Ma, Y.J.Guo, X.M.Lai, Residual stresses in roll-formed square hollow sections, Thin-Walled Structures, Thin-Walled Structures, vol.47, 2009: 505-513
[16] Xianghe Xu, Shuhui Li, Weigang Zhang, Zhongqin Lin, Analysis of thickness distribution of square-sectional hydroformed parts, Journal of Materials Processing & Technology, vol.209, No.16, 2009:158-164
[15] T.K. Shan, S.H. Li, W.G. Zhang, Z.G. Xu, Prediction of martensitic transformation and deformation behavior in the TRIP steel sheet forming, Materials and Design, vol.29, 2008: 1810-1816
[14] LI Shuhui, YANG Bing, ZHANG Weigang, LIN Zhongqin, Loading path Prediction for tube hydroforming process using a fuzzy control strategy, Materials and Design, vol.29, 2008: 1110-1116
[13] W.J. Dan, S.H. Li, W.G. Zhang, Z.Q. Lin, The effect of strain-induced martensitic transformation on mechanical properties of TRIP steel, Materials and Design, vol.29, No.3, 2008: 604-612
[12]Shuhui Li*, Dan W. J., Zhang W. G., Lin Z. Q., A model for strain-induced martensitic transformation of TRIP steel with pre-strain[J], Computational Materials Science, 2007, 40: 292-299
[11] Dan WJ, Zhang WG, Li SH, Lin ZQ,, A model for strain-induced martensitic transformation of TRIP steel with strain rate, COMPUTATIONAL MATERIALS SCIENCE, vol. 40, 2007: 101-107
[10] Dan WJ, Zhang WG, Li SH, Lin ZQ, Finite element simulation on strain-induced martensitic transformation effects in TRIP steel sheet forming, COMPUTATIONAL MATERIALS SCIENCE, vol.39, 2007: 593-599
[9] Wang WR, Chen GL, Lin ZQ, Li SH, Determination of optimal blank holder force trajectories for segmented binders of step rectangle box using PID closed-loop FEM simulation, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.32, 2007: 1074-1082
[8] Xu C, Lin ZQ, Li SH, Zhang WG, Research on shear strength of galvannealed coatings, MATERIALS & DESIGN, vol.28, 2007: 1668-1671
[7] Dan WJ, Zhang WG, Li SH, Lin ZQ, An experimental investigation of large-strain tensile behavior of a metal sheet, MATERIALS & DESIGN, vol.28, 2007: 2190-2196
[6] Yu HY, Li SH, Gao YK, Deformation behavior of the constituent phases for cold-rolled TRIP-assisted steels during uniaxial tension, MATERIALS CHARACTERIZATION, vol.57, 2006: 160-165
[5] Yang B, Zhang WG, Li SH, Analysis and finite element simulation of the tube bulge hydroforming process, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.29, 2006: 453-458
[4] Yu HY, Lin ZQ, Chen GL, Li SH, Overall stress-strain relationship of cold rotted transformation induced plasticity multiphase steels, MATERIALS SCIENCE AND TECHNOLOGY, vol. 21, 2005: 311-315
[3] Jiang HM, Li SH, Wu H, Chen XP, Numerical simulation and experimental verification in the use of tailor-welded blanks in the multi-stage stamping process, Journal of Materials Processing Technology, vol.151, 2004: 316-320
[2] Xu F, Lin ZQ, Li SH, Xu WL, Study on the influences of geometrical parameters on the formability of stretch curved flanging by numerical simulation, Journal of Materials Processing Technology, vol.145, 2004: 93-98
[1] Li Shuhui, Lin Zhongqin, Xu Weili, An improved equivalent drawbead model and its application, Journal of Materials Processing Technology, vol.121, 2002: 308-312