2004.9-2008.6 上海交通大学 机械工程及自动化-车辆工程 工学学士
2008.9-2015.6 上海交通大学 机械工程 工学博士

2018 至今 必赢线路检测中心薄板结构制造研究所 副教授
2017 - 2018 加拿大McMaster大学机械工程系 博士后
2015 - 2017 中国北方工业公司研发部 研发经理

2013.9-2014.8 香港理工大学机械工程系 交流学生
2017.2-2018.6 加拿大McMaster大学机械工程系 博士后 研究方向：金属精密成形及失效

新能源部件制造；
微细成形及其尺度效应；
金属断裂失效机理。
招收2025年入学硕博、2026年入学硕、博。

2025-2027 国家自然科学基金优秀青年基金 塑性成形工艺与装备 负责人
2023-2026 国家重点研发计划课题 极板耐蚀表面宽温域亲/疏水调控与超薄化制造 负责人
2023-2026 国家自然科学基金面上项目 铌涂层不锈钢箔材成形的表相开裂机理及成形极限预测 负责人
2020-2023 国家重点研发计划课题 融合基因组和高通量计算的燃料电池极板基材体系正向设计 负责人
2019-2021 上海市“科技创新行动计划”长寿命燃料电池钛合金双极板批量化制造技术 课题负责人
2019-2022 上海市自然科学基金 负责人
2020-2022 国家自然科学基金青年基金 负责人

2024：
[1] C. Li, D. Zhang, Z. Xu, L. Wang, P. Yi, L. Peng, X. Lai, Tailored nanocrystalline Niobium coatings on steel substrates for superior resistance to micro-crack initiation, Scripta Materialia, 241 (2024) 115864.
[2] Li, C., Zhang, D., Xu, Z., Wang, J., Yang, Y., Peng, L., Lai, X., 2024a. Fracture mechanism of metallic film with nano to sub-micron thickness on polycrystalline substrate. Scripta Materialia 252.
[3] Sun, H., Xu, Z., Zhang, D., Peng, L., Lai, X., 2024. Corrosion behavior of passivation layer Cr2O3 of uncoated stainless steel under the anodic and cathodic conditions: A first-principles study. Chemical Engineering Journal 493.
[4] Yang, H., Xu, Z., Peng, L., Lai, X., Fu, M., 2024. Chromium gradient stainless steels with simultaneous high strength, ductility, and corrosion-resistant: In-depth study of continuous hardening mechanisms. International Journal of Plasticity 181.

2023：
[1] H. Yang, Z. Xu, L. Peng, X. Lai, High ductility and corrosion resistance chromium gradient stainless steel for fuel cell bipolar plates fabricated via laser powder bed fusion, Journal of Materials Processing Technology, 317 (2023) 118002.
[2] Z. Xu, R. Zhang, L. Peng, M.W. Fu, Crystal plasticity-based analysis and modelling of grain size and strain path dependent micro-scaled deformation mechanisms of ultra-thin sheet metals, International Journal of Plasticity, 168 (2023) 103696.
[3] Z. Xu, D. Qiu, M.M. Shahzamanian, Z. Zhou, D. Mei, L. Peng, An improved springback model considering the transverse stress in microforming, International Journal of Mechanical Sciences, 241 (2023) 107947.
[4] Z. Xu, X. Li, R. Zhang, J. Ma, D. Qiu, L. Peng, The effect of electric current on dislocation activity in pure aluminum: A 3D discrete dislocation dynamics study, International Journal of Plasticity, 171 (2023) 103826.
[5] T. Xie, Y. Yang, J. Wang, T. Ying, Z. Xu, X. Zeng, First-Principles Study of F and H Adsorption on Corrosion Resistance of Titanium Bipolar Plates, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 54 (2023) 3412-3416.
[6] M.H. Wang, S.H. Lan, Z.T. Xu, L.F. Peng, X.M. Lai, Grain scale effect and damage modeling of fracture under different stress triaxialities, Suxing Gongcheng Xuebao/Journal of Plasticity Engineering, 30 (2023) 121-130.
[7] H. Sun, Z.T. Xu, D. Zhang, First-principles calculations to investigate doping effects on electrical conductivity and interfacial contact resistance of TiO2, Applied Surface Science, 614 (2023) 156202.
[8] H. Sun, Z. Xu, D. Zhang, L. Peng, X. Lai, Effects of charge rearrangement on interfacial contact resistance of TiO2/graphite from first-principles calculations, Applied Surface Science, 635 (2023) 157640.
[9] D. Qiu, X. Zhou, M. Chen, Z. Xu, L. Peng, Optimization of control strategy for air-cooled PEMFC based on in-situ observation of internal reaction state, Applied Energy, 350 (2023) 121752.
[10] L.F. Peng, J.H. Huang, Z.T. Xu, J.S. Liu, Electropulsing-induced phase transformation behavior in metal materials, Suxing Gongcheng Xuebao/Journal of Plasticity Engineering, 30 (2023) 111-124.
[11] H. Li, L.F. Peng, B. Meng, Z.T. Xu, L.L. Wang, G. Ngaile, M.W. Fu, Energy field assisted metal forming: Current status, challenges and prospects, International Journal of Machine Tools and Manufacture, 192 (2023) 104075.
[12] H. Li, F. Bi, L. Dong, Z. Xu, X. Li, F. Zhou, C. Fan, W. Shi, L. Peng, X. Lai, A novel ex-situ accelerated evaluation method for metallic bipolar plates in proton exchange membrane fuel cells, Journal of Power Sources, 580 (2023) 233374.
2022：
[1] R. Zhang, Z. Xu, L. Peng, X. Lai, M.W. Fu, Intragranularly misoriented grain boundary evolution affected by local constraints and grain size in micro-scale deformation of ultra-thin metallic sheets, International Journal of Plasticity, 157 (2022) 103377.
[2] H. Yang, Z. Xu, L. Peng, Robust design for the precision forming of metallic bipolar plates of proton exchange membrane fuel cell, in: nanoMan 2022 and AETS 2022 - 2022 8th International Conference on Nanomanufacturing and 4th AET Symposium on ACSM and Digital Manufacturing, 2022.
[3] H. Yang, T. Jiang, Z. Xu, L. Peng, A robust design of the forming process parameters of the metallic bipolar plate for proton exchange membrane fuel cells, International Journal of Hydrogen Energy, 47 (2022) 41154-41169.
[4] Z. Xu, L. Sun, T. Jiang, L. Peng, X. Lai, Fracture Size Effect of Titanium Sheets in Microforming and Its Meso Damage Criterion, Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 58 (2022) 51-57.
[5] Z. Xu, T. Jiang, J. Huang, L. Peng, X. Lai, M.W. Fu, Electroplasticity in electrically-assisted forming: Process phenomena, performances and modelling, International Journal of Machine Tools and Manufacture, 175 (2022) 103871.
[6] L. Sun, Z. Xu, L. Peng, X. Lai, Grain-size-dependent ductile-to-brittle fracture mechanism of titanium sheets, Scripta Materialia, 219 (2022) 114877.
[7] M.M. Shahzamanian, C. Thomsen, A. Partovi, Z. Xu, P.D. Wu, The effect of superimposed hydrostatic pressure on shear decohesion in round bar tensile specimens, International Journal of Fracture, 233 (2022) 179-194.
[8] X. Li, Z. Xu, P. Guo, L. Peng, X. Lai, Electroplasticity mechanism study based on dislocation behavior of Al6061 in tensile process, Journal of Alloys and Compounds, 910 (2022) 164890.
[9] C. Li, D. Zhang, Z. Xu, P. Yi, L. Peng, X. Lai, Optimal bias voltage of substrate for formable nanocrystalline Niobium precoatings of metallic bipolar plates, in: nanoMan 2022 and AETS 2022 - 2022 8th International Conference on Nanomanufacturing and 4th AET Symposium on ACSM and Digital Manufacturing, 2022.
[10] C. Li, Z. Xu, L. Peng, X. Lai, An electric-pulse-assisted stamping process towards springback suppression and precision fabrication of micro channels, International Journal of Mechanical Sciences, 218 (2022) 107081.
[11] J. Huang, Z. Xu, L. Peng, J. Liu, Experimental investigation on hydrophobic/superhydrophobic micro patterns: New manufacture method and performance, Materials Today Communications, 33 (2022) 104666.
2021：
[1] R. Zhang, Z. Xu, L. Peng, X. Lai, M.W. Fu, Modelling of ultra-thin steel sheet in two-stage tensile deformation considering strain path change and grain size effect and application in multi-stage microforming, International Journal of Machine Tools and Manufacture, 164 (2021) 103713.
[2] R. Zhang, S. Lan, Z. Xu, D. Qiu, L. Peng, Investigation and optimization of the ultra-thin metallic bipolar plate multi-stage forming for proton exchange membrane fuel cell, Journal of Power Sources, 484 (2021) 229298.
[3] Z. Xu, L. Peng, X. Lai, Effect of grain size on the ductile-brittle fracture behavior of commercially pure titanium sheet metals, Materials Science and Engineering: A, 822 (2021) 141630.
[4] Z. Xu, L. Peng, M.K. Jain, D. Anderson, J. Carsley, Local and global tensile deformation behavior of AA7075 sheet material at 673oK and different strain rates, International Journal of Mechanical Sciences, 195 (2021) 106241.
[5] Z. Xu, Z. Li, R. Zhang, T. Jiang, L. Peng, Fabrication of micro channels for titanium PEMFC bipolar plates by multistage forming process, International Journal of Hydrogen Energy, 46 (2021) 11092-11103.
[6] L. Sun, Z. Xu, L. Peng, X. Lai, Ductile-to-brittle fracture size effect of titanium sheets in micro/mesoscale plastic deformation, in: ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2021, pp. V003T003A014.
[7] M.M. Shahzamanian, D.J. Lloyd, P.D. Wu, Z. Xu, Study of influence of superimposed hydrostatic pressure on bendability of sheet metals, European Journal of Mechanics, A/Solids, 85 (2021) 104132.
[8] M. Shahzamanian, C. Thomsen, A. Partovi, Z. Xu, P. Wu, Numerical study about the influence of superimposed hydrostatic pressure on shear damage mechanism in sheet metals, Metals, 11 (2021) 1193.
[9] L. Peng, R. Zhang, Z. Xu, X. Lai, Plastic Deformation Forming of Metallic Bi-Polar Plate - Part 1: Theoretical Basis and Fundamental, in: Encyclopedia of Materials: Metals and Alloys, 2021, pp. 260-277.
[10] L. Peng, R. Zhang, Z. Xu, X. Lai, Plastic Deformation Forming of Metallic Bipolar Plate - Part 2: Implementation and Application, in: Encyclopedia of Materials: Metals and Alloys, 2021, pp. 278-307.
[11] L. Peng, Z. Xu, M. Mao, X. Lai, M.W. Fu, Damage mechanisms of material in single-cone scratching, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 143 (2021) 061013.
[12] F. Huang, D. Qiu, Z. Xu, L. Peng, X. Lai, Analysis and improvement of flow distribution in manifold for proton exchange membrane fuel cell stacks, Energy, 226 (2021) 120427.
2020：
[1] R. Zhang, Z. Xu, Y. Deng, L. Peng, Characterizing the back stress of ultra-thin metallic sheet via pre-strain tension/bending process, Journal of Materials Processing Technology, 279 (2020) 116560.
[2] Z. Xu, D. Qiu, P. Yi, L. Peng, X. Lai, Towards mass applications: A review on the challenges and developments in metallic bipolar plates for PEMFC, Progress in Natural Science: Materials International, 30 (2020) 815-824.
[3] Z. Xu, L. Peng, X. Lai, Investigation on the roll-to-plate microforming of riblet features with the consideration of grain size effect, International Journal of Advanced Manufacturing Technology, 109 (2020) 2055-2064.
[4] Z. Xu, J. Huang, M. Mao, L. Peng, X. Lai, An investigation on the friction in a micro sheet metal roll forming processes considering adhesion and ploughing, Journal of Materials Processing Technology, 285 (2020) 116790.
[5] X. Li, Z. Xu, J. Huang, L. Peng, X. Lai, In situ observation of deformation behavior of Ti6Al4V subjected to electrically-assisted forming process, in: Procedia Manufacturing, 2020, pp. 647-651.
[6] X. Li, Z. Xu, J. Huang, L. Peng, P. Guo, Effects of electropulsing treatment on the element diffusion between Ti6Al4V and commercially pure titanium, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 142 (2020) 051002-051001.
[7] J. Huang, Z. Xu, X. Li, L. Peng, X. Lai, An experimental study on a rapid micro imprinting process, Journal of Materials Processing Technology, 283 (2020) 116716.
2019：
[1] Z. Xu, L. Peng, P. Yi, X. Lai, An investigation on the formability of sheet metals in the micro/meso scale hydroforming process, International Journal of Mechanical Sciences, 150 (2019) 265-276.
[2] X. Li, S. Lan, Z. Xu, T. Jiang, L. Peng, Thin metallic wave-like channel bipolar plates for proton exchange membrane fuel cells: Deformation behavior, formability analysis and process design, Journal of Power Sources, 444 (2019) 227217.
[3] J. Huang, Z. Xu, Y. Deng, L. Peng, Electropulsing-induced α to β phase transformation of Ti-6Al-4V, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 141 (2019) 111012.
2018之前：
[1] Z. Xu, L. Peng, E. Bao, Size effect affected springback in micro/meso scale bending process: Experiments and numerical modeling, Journal of Materials Processing Technology, 252 (2018) 407-420.
[2] L. Peng, Z. Xu, Z. Gao, M.W. Fu, A constitutive model for metal plastic deformation at micro/meso scale with consideration of grain orientation and its evolution, International Journal of Mechanical Sciences, 138-139 (2018) 74-85.
[3] L.F. Peng, Z.T. Xu, M.W. Fu, X.M. Lai, Forming limit of sheet metals in meso-scale plastic forming by using different failure criteria, International Journal of Mechanical Sciences, 120 (2017) 190-203.
[4] Z.T. Xu, L.F. Peng, M.W. Fu, X.M. Lai, Size effect affected formability of sheet metals in micro/meso scale plastic deformation: Experiment and modeling, International Journal of Plasticity, 68 (2015) 34-54.
[5] Z.T. Xu, L.F. Peng, X.M. Lai, M.W. Fu, Geometry and grain size effects on the forming limit of sheet metals in micro-scaled plastic deformation, Materials Science and Engineering: A, 611 (2014) 345-353.
[6] Z. Xu, L. Peng, X. Lai, Electrically assisted solid-state pressure welding process of SS 316 sheet metals, Journal of Materials Processing Technology, 214 (2014) 2212-2219.
[7] L. Peng, Z. Xu, X. Lai, An investigation of electrical-assisted solid-state welding/bonding process for thin metallic sheets: Experiments and modeling, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228 (2014) 582-594.
[8] Z. Xu, L. Peng, P. Yi, X. Lai, Study on a novel electrical-assisted pressure welding process of thin metallic foils, in: Applied Mechanics and Materials, 2013, pp. 147-152.
[9] Z. Xu, L. Peng, P. Yi, X. Lai, Modeling of microchannel hydroforming process with thin metallic sheets, Journal of Engineering Materials and Technology, 134 (2012) 021017.

本科生课程：设计与制造II

研究生课程：应用固体力学

CN201910838513.2 一种工件表面微结构的电辅助快速压印成形装置
CN202010334974.9 一种带有表面微结构的燃料电池金属极板及其制造方法
CN202010945042.8 一种燃料电池金属双极板成形误差检测装置
CN202110175962.0 一种燃料电池金属双极板的电辅助成形装置及工艺
CN202110478414.5 一种钛合金表面微纳颗粒复合导电增强结构及其制备方法

中国机械工程学会塑性工程分会 会员

2022 第十届全国大学生机械创新设计大赛一等奖 指导教师
2019 上海市技术发明特等奖 排8
2015 上海交大必赢线路检测中心“优秀共产党员”