Ph.D., Mechanical Engineering and Materials, Arts et Métiers ParisTech, 2016
M.Sc., Mechanical Manufacturing & Automation, Shanghai Jiao Tong University, 2013
B.Eng., Mechanical Manufacturing & Automation, Nanjing Agricultural University, 2010

Jan. 2020 – Present, Associate Professor, School of Mechanical Engineering, Shanghai Jiao Tong University
Jun. 2017 - Present, Doctoral Supervisor, School of Mechanical Engineering, Shanghai Jiao Tong University
Sep. 2016 – Dec. 2019, Tenure-Track Assistant Professor, School of Mechanical Engineering, Shanghai Jiao Tong University
Sep. 2015 - Aug. 2016, Research Assistant affiliated at the Laboratory of Mechanics, Surfaces and Materials Processing, Arts et Métiers ParisTech, France

The main research interests include but are not limited to:
1. High-Performance Machining Technology for Composite Parts
2. Micro-Machining & Multi-Scale Manufacturing Techniques
3. Preparation Techniques of Functional Surfaces & Interfaces
4. Numerical Modeling and FE Analysis of Machining Operations

My research interests concern the machining of fibrous composites utilizing both experimental and numerical methodologies, and multi-scale machining of functional surfaces for dental dentures. The specific research fields include but are not limited to:
1. Multi-scale analysis of machining fibrous composites in relation to subsurface imperfections using both experimental and numerical methodologies;
2. Investigations addressing the mechanisms of heat transfer and issues of heat-induced damage for fibrous composites subjected to mechanical machining;
3. Constitutive modeling of composite materials introducing the thermo-mechanical coupling effects of machining;
4. Studies concerning the micro-machining of functional topological surfaces for dentures and the development of specialized tools and fabrication processes.

【Educational Research Projects】
[1] The 2023 Teaching Development Fund Project of Shanghai Jiao Tong University, “Blended Teaching Design and Ideological and Political Construction of Design and Manufacturing II Course based on the OBE Concept”, Project No. CTLD23J0047, Principal Investigator, Excellent Completion.
[2] 2022-2023, “Study on the Students' Learning Mechanisms and Effect Evaluations Under the Blended Teaching Mode”, The Teaching Development Funds of Shanghai Jiao Tong University (Grant No. CTLD22J0014), Principal Investigator, Excellent Completion.
[3] 2021-2022, “Study on the Reform and Practice of the Blended Teaching of the ACTMT Course Based on the OBE Concept”, The Teaching Development Funds of Shanghai Jiao Tong University (Grant No. CTLD21J0026), Principal Investigator, Good Completion.
[4] 2020-2021, “Analysis and Evaluation of Students Learning Effects Based on the Online and Offline Mixed Teaching Modes”, The Education and Teaching Research Projects of Shanghai Jiao Tong University (Grant No. JYJX200063), Principal Investigator, Excellent Completion.
[5] 2020-2021, “Research and Analysis Based on the Mechanical Engineering Professional System of Top International and Domestic Universities”, The 2020 Education and Teaching Research Projects of School of Mechanical Engineering, SJTU (Grant No. ME2020J02), Principal Investigator.

【Research Projects】
[P1] 2022-2024, "Integrated Technology and Large-scale Application of the Collaborative Design and Preparation of High-Performance Aerospace Cutting Tools", The Shanghai Industrial Collaborative Innovation Project (Grant No. HCXBCY-2022-040), Principal Investigator
[P2] 2021-2023, "Comparative machinability analysis of recycled and conventional CFRP composites", The 9th Sino-Hungarian Intergovernmental Scientific and Technological Cooperation Project (Grant No. 2021-07), Principal Investigator
[P3] 2022-2025, "Research on Micro-Texture Preparation Technology of Dental Zirconia Ceramics Using Ultrasonic Vibration Assisted Milling Based on the Sintering Process Control", National Natural Science Foundation of China (Grant No.52175425), Principal Investigator.
[P4] 2022-2025, "Clinical evaluation and low-damage and densification implant-preparation method for loose alveolar bone based on mechanical biology", National Natural Science Foundation of China (Grant No.52175422), Main Participant.
[P5] 2021-2023, "Demonstration application of the integration of high-speed clean cutting equipment, cutting tools and intelligent support system in the black light factory of automobile engine processing", National Key Research and Development Program (Grant No.2020YFB2010600), Principal Investigator.
[P6] 2018-2020, "Physical modeling and numerical simulation of interface defects in drilling CFRP/alloy stacks", National Natural Science Foundation of China (Grant No.51705319), Principal Investigator.
[P7] 2020-2023, "Research on laser assisted ultrasonic milling technology of SiCf/SiC composites for fatigue performance enhancement", National Natural Science Foundation of China (Grant No. 51975368), Main Participant.
[P8] 2019-2022, "High-speed cutting physical modeling and database foundation of typical titanium alloy in the whole process environment", National Natural Science Foundation of China (Grant No. 51875356), Main Participant.
[P9] 2017-2019, "Research on high-efficiency and high-precision drilling of CFRP/Ti stacks", Shanghai Pujiang Program (Grant No.17PJ1403800), Principal Investigator.
[P10] 2017-2019, "Demonstration of applications of flexible manufacturing equipment for launch vehicles", National Science and Technology Major Project (Grant No.2017ZX04005001), Main Participant.
[P11] 2017-2019, "Investigation on the high-precision hole-making of composite/metal stacks and tool development", Shanghai Academy of Spaceflight Technology (Grant No. SAST2017-060), Principal Investigator.
[P12] 2017-2018, "Study on high-precision drilling of CFRP/Ti stacks and tool development", Research Project of State Key Laboratory of Mechanical System and Vibration (Grant No. MSVZD201704), Principal Investigator.
[P13] 2013-2016, "Étude numérique et expérimentale de l'usinage des matériaux hybrides titane-composites", Arts et Métiers ParisTech, Principal Investigator.

【Dr. Jinyang Xu has been ranked as the World's Top 2% Scientists by Stanford University for four consecutive years (2021-2024). He has published over 140 peer-reviewed articles in COST, COMPOS PART B, JMP, WEAR, JMRT, MMP, etc., and edited 3 monographs, 5 book chapters, 10 int. conf. proceedings and 11 special issues, being cited over 4100 times with an h-index of 38 according to Google Scholar Citations. He has delivered more than 20 keynote lectures in various international conferences and has applied over 40 national patents. He is the Founding Editor of the International Journal of Product Sound Quality (IJPSQ) and holds the Editor-in-Chief position of Journal of Coating Science and Technology (JCST), and International Journal of Precision Technology (IJPTech). 】

【Editor-in-Chief of International Journals】
International Journal of Precision Technology (IJPTech) (Inderscience Publishers, Switzerland)
Website: http://www.inderscience.com/ijptech
International Journal of Product Sound Quality (IJPSQ) (Inderscience Publishers, Switzerland) Website: http://www.inderscience.com/ijpsq
Journal of Coating Science and Technology (JCST) (Lifescience Global, Canada)
Website: https://www.lifescienceglobal.com/journals/journal-of-coating-science-and-technology

【Associate Editors of International Journals】
Proc Inst Mech Eng Pt E - J Process Mech Eng (Indexed by SCI, EI, SCOPUS, etc.)
Simulation – Trans Soc Mod Sim Int (Indexed by SCI, EI, SCOPUS, etc.)
Frontiers in Materials (Indexed by SCI, EI, SCOPUS, etc.)
Int. J. Manuf., Mater., Mech. Eng. (Indexed by ESCI, SCOPUS, etc.)
Int. J. Surf. Eng. Interdiscip. Mater. Sci. (Indexed by SCOPUS, etc.)

【Academic Editors and Board Members of SCI/ESCI/EI Journals】
Youth Editor, International Journal of Extreme Manufacturing (Indexed by SCI, EI, SCOPUS, etc.)
Academic Editor, International Journal of Aerospace Engineering (Indexed by SCI, EI, SCOPUS, etc.)
Editorial Board, Green Materials (Indexed by SCI, EI, SCOPUS, etc.)
Editorial Board, Journal of Superhard Materials (Indexed by SCI, EI, SCOPUS, etc.)
Editorial Board, Journal of Composites Science (Indexed by ESCI, SCOPUS, etc.)
Editorial Board, Lubricants (Indexed by SCI, SCOPUS, etc.)
Editorial Board, Coatings (Indexed by SCI, SCOPUS, etc.)
Editorial Board Member, Current Materials Science (Indexed by EI, SCOPUS, etc.)
Editorial Board Member, Current Mechanics and Advanced Materials (CMAM)
Editorial Board Member, Tribology in Industry (Indexed by SCOPUS, etc.)
Youth Editorial Board Member, Surface Technology (Indexed by EI) (in Chinese)

【Edited Monographs/Book Series/Book Chapters】
[M-1] Chi-Hua Chen, Jinyang Xu. Proceedings of the 2nd International Conference on Automation, Robotics and Computer Engineering (ICARCE) [M]. IEEE Xplore, 2024, ISBN: 979-8-3503-0835-8. https://doi.org/10.1109/ICARCE59252.2023
[M-2] Vitalii Ivanov, Ivan Pavlenko, Milan Edl, Jose Machado, Jinyang Xu. Advances in Design, Simulation and Manufacturing VII [M]. Lecture Notes in Mechanical Engineering, 2024, ISBN: 978-3-031-63720-9. https://doi.org/10.1007/978-3-031-63720-9
[M-3] Manoj Gupta, Jinyang Xu, Krishna Murari Pandey. Proceedings of the 4th International Conference on Mechanical Engineering and Materials (ICMEM2023) [M]. Journal of Physics: Conference Series, 2024, 2694: 011001-012082. https://iopscience.iop.org/issue/1742-6596/2694/1
[M-4] Jinyang Xu*. Mechatronics and Automation Technology - Proceedings of ICMAT 2023 [M]. IOS Press Ebook: Advances in Transdisciplinary Engineering, 2023, ISBN: 978-1-64368-482-6. https://ebooks.iospress.nl/ISBN/978-1-64368-482-6
[M-5] Jinyang Xu*, J. Paulo Davim. New Materials, Machinery and Vehicle Engineering [M]. IOS Press Ebook: Advances in Transdisciplinary Engineering, 2023, ISBN: 978-1-64368-420-8. https://ebooks.iospress.nl/ISBN/978-1-64368-420-8
[M-6] Jinyang Xu*. Manufacturing of Fibrous Composites for Engineering Applications [M]. MDPI Publishers, 2023, ISBN: 978-3-03658-120-0.
[M-7] Jinyang Xu*. Mechatronics and Automation Technology - Proceedings of the 2022 International Conference on Mechatronics and Automation Technology [M]. IOS Press Ebook: Advances in Transdisciplinary Engineering, 2022, ISBN: 978-1-64368-366-9.
[M-8] Rajesh Kumar Verma*, Shivi Kesarwani, Jinyang Xu, J. Paulo Davim. Polymer Nanocomposites: Fabrication to Applications [M]. CRC Press, 2023, ISBN: 978-1-03238-195-4.
[M-9] Jinyang Xu*, J. Paulo Davim, Ming Chen. Machining Effects of Fibrous Composites and Related Stacks for Aerospace Applications [M]. In: N. Mazlan, S.M. Sapuan, R.A. Ilyas, editors. Advanced Composites in Aerospace Engineering Applications, Springer International Publishing, 2022, ISBN: 978-3-030-88191-7, p. 109-25. https://doi.org/10.1007/978-3-030-88192-4_5
[M-10] Jinyang Xu*, J. Paulo Davim. Machining of Fibrous Composites: Recent Advances and Future Perspectives [M]. In: J. Paulo Davim, Editor. Mechanical and Industrial Engineering: Historical Aspects and Future Directions, Springer International Publishing, 2022, ISBN: 978-3-030-90486-9, p. 161-77. https://doi.org/10.1007/978-3-030-90487-6_6
[M-11] Jinyang Xu, Krishna Murari Pandey. Mechanical Engineering and Materials – Proceedings of ICMEM2020 [M]. Springer Book Series: Mechanisms and Machine Science, 2020, ISBN: 978-3-030-68302-3. https://www.springer.com/gp/book/9783030683023
[M-12] Ming Chen, Jinyang Xu, Qinglong An. Machining Theory and Application Techniques for CFRP Composites and Multilayer Stacks [M]. Shanghai: Shanghai Scientific & Technical Publishers, 2019, ISBN: 978-7-5478-4283-6. (In Chinese)
[M-13] Jinyang Xu. High-Speed and Hard Cutting Technology. In: Ming Chen, Qinglong An & Zhiqiang Liu, editors. Fundamentals and Applications of High-Speed Cutting [M]. Shanghai: Shanghai Scientific & Technical Publishers; 2012, p. 157-174, ISBN: 978-7-5478-1300-3. (In Chinese)

【Edited Issues】
[SI-1] Jinyang Xu*. Guest Editor of the Special Issue – “Advances in Machining and Milling Technologies: Innovations, Applications, Management and Process Optimization” – Proc. IMechE Part E - Journal of Process Mechanical Engineering (SCI/EI, Website: https://journals.sagepub.com/page/pie/machiningandmilling)
[SI-2] Jinyang Xu*. Guest Editor of the Special Issue – “Manufacturing of Fibrous Composites for Engineering Applications, Volume II” – Journal of Composites Science (JCS, ESCI/SCOPUS, Website: https://www.mdpi.com/si/172505)
[SI-3] Jinyang Xu*. Lead Guest Editor of the Special Issue – “Current Research Advances in Aerospace Manufacturing Fields” – International Journal of Manufacturing Technology and Management (EI/SCOPUS, Website: https://www.inderscience.com/info/ingeneral/cfp.php?id=5755)
[SI-4] Jinyang Xu*. Lead Guest Editor of the Special Issue – “Composites Machining and Simulation” – Aeronautical Manufacturing Technology (Website: http://www.amte.net.cn/CN/volumn/volumn_1433.shtml, In Chinese)
[SI-5] Jinyang Xu*. Lead Guest Editor of the Special Issue – “Application of Artificial Intelligence in Mechatronics” – Applied Sciences (SCIE/SCOPUS, Website: https://www.mdpi.com/journal/applsci/special_issues/AI_Mechatronics)
[SI-6] Jinyang Xu*. Guest Editor of the Special Issue – “Novel Approaches in the Design, Simulation, and Manufacturing for Processes and Systems” – Materials (SCIE/EI/SCOPUS, Website: https://www.mdpi.com/si/165101)
[SI-7] Jinyang Xu*. Guest Editor of the Special Issue – “Structural Vibration: Analysis, Design, Control and Applications” – International Journal of Product Sound Quality (Website: https://www.inderscience.com/info/ingeneral/cfp.php?id=5629)
[SI-8] Jinyang Xu*. Guest Editor of the Special Issue – “Energy, Material Science and Environmental Engineering” – Coatings (SCIE/SCOPUS, Website: https://www.mdpi.com/journal/coatings/special_issues/ICEMSEE)
[SI-9] Jinyang Xu*. Guest Editor of the Special Issue – “Manufacturing of Fibrous Composites for Engineering Applications” – Journal of Composites Science (JCS, ESCI/SCOPUS, Website: https://www.mdpi.com/si/95501)
[SI-10] Jinyang Xu*. Lead Guest Editor of the Special Issue – “Recent Advances in the Manufacturing of Polymeric Composites” – Advances in Materials Science and Engineering (AMSE, EI/SCOPUS, Website: https://onlinelibrary.wiley.com/doi/toc/10.1155/5928.si.348945)
[SI-11] Jinyang Xu*. Lead Guest Editor of the Special Issue – “Advanced Coating Materials for Machining Processes” – Coatings (SCIE/SCOPUS, Website: https://www.mdpi.com/journal/coatings/special_issues/Advanced_Machining)
[SI-12] Jinyang Xu*. Lead Guest Editor of the Special Issue – “Experimental and Numerical Investigations in Mechanical Machining of Fibre-Reinforced Composite Materials” – Advances in Materials Science and Engineering (AMSE, EI/SCOPUS, Website: https://onlinelibrary.wiley.com/doi/toc/10.1155/5928.si.894031)

【Plenary/Invited Talks】
[T1] Jinyang Xu*. Machining of Composite/Metal Stacks: Challenges, Principles and Solutions. The 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE2024), Pilsen, Czech Republic, 4-7 June, 2024. (Plenary Lecture)
[T2] Jinyang Xu*. High-Performance Machining of CFRP/Titanium Stacks. International Conference on Advancements in Materials, Design and Manufacturing for Sustainable Development (ICAMDMS 2024), Coimbatore, India, 23-24 February, 2024. (Plenary Lecture, Online)
[T3] Jinyang Xu*. Study on the Blended Teaching Reform based on the OBE Concept and Double PBL Mode. The 10th Annual Congress of the Chinese Higher Education Development Network (CHED2023), Wuxi, China, 20-22 October, 2023. (Invited Talk, in Chinese)
[T4] Jinyang Xu*. Surface Texturing Technology of 3Y-TZP Ceramics. The 2nd International Summit Forum on Precision Machining Technology and Application (PME2023), Shanghai, China, 9-11 October, 2023. (Invited Talk, in Chinese)
[T5] Jinyang Xu*. Design and Practice of Blended Teaching Based on the OBE Concept and 2PBL Mode. The 17th Conference on Machining & Advanced Manufacturing Technology (CMAMT2023), Shenyang, China, 2-4 August, 2023. (Invited Talk, in Chinese)
[T6] Jinyang Xu*. Fabrication Technology of Microtextures for Dental Ceramics. The 17th Conference on Machining & Advanced Manufacturing Technology (CMAMT2023), Shenyang, China, 2-4 August, 2023. (Invited Talk, in Chinese)
[T7] Jinyang Xu*. High-Performance Machining. The 22nd International Exhibition on Die & Mould Technology and Equipment (DMC2023), Shanghai, China, 12 June, 2023. (Plenary Talk, in Chinese)
[T8] Jinyang Xu*. Fabrication of Textured Zirconia Ceramics Through Laser Ablation and Mechanical Milling. The 2023 International Conference on New Materials, Machinery and Vehicle Engineering (NMMVE2023), Guiyang, China, 2-4 June, 2023. (Plenary Talk)
[T9] Jinyang Xu*. Improving Service Performances of 3Y-TZP Ceramics for Dental Applications by Surface Texturing. The 4th International Conference on Modeling, Simulation, Optimization and Algorithm (ICMSOA2022), Sanya, China, 11-13 November, 2022. (Plenary Talk, Online)
[T10] Jinyang Xu*. Surface Texturing of Dental 3Y-TZP Ceramics. The 2022 IAAM Fellow Summit, Stockholm, Sweden, 30 August, 2022. (IAAM Fellow Lecture/Online Webinar)
[T11] Jinyang Xu*. Addressing Machinability Issues of CFRPs Using Functionally-Designed Drills. The 2022 International Conference on New Materials, Machinery and Vehicle Engineering, Guilin, China, 18-20 March, 2022. (Plenary Talk, Online)
[T12] Jinyang Xu*. Properties Modification of Dental 3Y-TZP Ceramics Based on the Surface Texturing Techniques. The 3rd China-Korea International Conference on Ultra-Precision Machining Process, Shanghai, China, 9 January, 2022. (Plenary Talk, Online Webinar)
[T13] Jinyang Xu*. Machining Aerospace-Grade Metallic-Composite Stack Surfaces. The 3rd International Conference on Lightweight Materials & Engineering Structures, Glasgow, UK, 22-23 November, 2021. (Plenary Talk, Online)
[T14] Jinyang Xu*. Numerical Modeling and Experimental Study of Machining CFRP/Titanium Stacks. The 3rd International Conference on Modeling, Simulation, Optimization and Algorithm, Sanya, China, 12-14 November, 2021. (Plenary Talk)
[T15] Jinyang Xu*. Preparation and Machining of Zirconia Ceramics for Dental Applications. The 11th International Advances in Applied Physics & Materials Science Congress & Exhibition, Ölüdeniz, Turkey, 17-23 October, 2021. (Plenary Talk, Online)
[T16] Jinyang Xu*. Cutting Behaviors and Mechanisms of Hybrid Composite Stacks. The 7th National Composites Innovation and Application Technology Conference, Harbin, China, 18-20 June, 2021. (In Chinese) (Plenary Talk)
[T17] Jinyang Xu*. The Material-Mechanical-Function Integrated Manufacturing Technology for Ceramic Dentures. The 7th International Symposium on Advanced Cutting Technology, Shenzhen, China, 24-26 November, 2020. (In Chinese) (Plenary Talk)
[T18] Jinyang Xu*. Drilling Studies of High-Strength CFRP Composites Using Specialized Drills. The 10th International Advances in Applied Physics & Materials Science Congress & Exhibition, Ölüdeniz, Turkey, 14-20 October, 2020. (Plenary Talk, Online)
[T19] Jinyang Xu*. Machining Challenges and Solutions to Aerospace Grade Composite-Titanium Stacks. The Advanced Materials Lecture Series 2020, Ulrika, Sweden, 22 May, 2020. (IAAM Award Lecture/Online Webinar)
[T20] Jinyang Xu*. Machining of Aerospace Grade CFRP/Titanium Stacks: Numerical and Experimental Analysis. The 2019 International Conference of Advanced Coating and Materials for Cutting Tools, Taizhou, China, 21-23 November, 2019. (Plenary Talk)
[T21] Jinyang Xu*. Machining Challenges and Solutions to Aerospace Grade Composite-Titanium Stacks. The 9th International Advances in Applied Physics & Materials Science Congress & Exhibition, Ölüdeniz, Turkey, 22-28 October, 2019. (Invited Talk)
[T22] Jinyang Xu*. Addressing the Issues of Frictional Heat in Drilling of CFRP Composites. The 14th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2018), Harbin, China, 13-15 September, 2018. (Invited Talk)
[T23] Jinyang Xu*. High-Precision Machining of Fibrous Composites and Multilayer Stacks. The 3rd Sino-German Workshop on “Material-Oriented Micro/Nano Manufacturing: Modeling, Experiment and Application”, Chengdu, China, 25-31 October, 2020. (Invited Talk)
[T24] Jinyang Xu*. Mechanical Machining of Multilayer Composite-Titanium Stacks. The 2020 International Congress on Advanced Materials Sciences and Engineering, Vienna, Austria, 22-25 July, 2020. (Invited Talk)

【Featured/Invited Articles】
[J1] Jinyang Xu*. Research advances in drilling-induced defects of carbon fiber reinforced polymers. Aeronautical Manufacturing Technology, 2022, 65 (22): 24-33. (In Chinese)
[J2] Jinyang Xu*, Tieyu Lin, J. Paulo Davim. On the machining temperature and hole quality of CFRP laminates when using diamond-coated special drills. Journal of Composites Science, 2022, 6 (2): 45.
[J3] Tieyu Lin, Jinyang Xu*, Chao Li, Qinglong An, Weiwei Ming, Ming Chen, Lun Shi. Energy consumption of high-speed milling of AlSi7Mg aluminum alloys under the electrostatic minimum quantity lubrication. Surface Technology, 2022, 51(6): 317-326. (In Chinese)
[J4] Jinyang Xu*, Chao Li, Min Ji. Review on recent advances in drilling of CFRP/Ti stacks. Tool Engineering, 2020, 54 (12): 3-9. (In Chinese)
[J5] Jinyang Xu*, Xianghui Huang, Ming Chen, Qinglong An. Finite element study on effects of tool wear patterns on the machining process of Ti6Al4V. Aeronautical Manufacturing Technology, 2020, 63 (3): 14-21. (In Chinese)
[J6] Jinyang Xu*, Sipei Mi, Weiwei Ming, Qinglong An, Ming Chen. Research advances in cutting modeling of fiber reinforced polymer composites. Aeronautical Manufacturing Technology, 2018, 61 (22): 16-23. (In Chinese)

【Journal Articles】
[J1] Jinyang Xu*, Jiaxin Shen, Linfeng Li, Guoqiang Guo, Xinfa Zhu, Yi Meng, Ming Chen. Milling machinability analysis of GW63K rare-earth magnesium alloys based on the concept of clean cutting. Journal of Materials Research and Technology, 2023, 26: 9380-9391.
[J2] Jinyang Xu*, Jiaxin Shen, Linfeng Li. Mechanical milling and surface texturing of 3Y-TZP ceramics: A mini review. Advances in Transdisciplinary Engineering, 2023, 37: 329-336.
[J3] Jinyang Xu*, Jiaxin Shen, Linfeng Li. Numerical study of different tools in high-speed MQL cutting of aluminum alloys. Advances in Transdisciplinary Engineering, 2023, 37: 18-25.
[J4] Norbert Geier*, Jinyang Xu*, Dániel István Poór, Jan Hendrik Dege, J Paulo Davim. A review on advanced cutting tools and technologies for edge trimming of carbon fibre reinforced polymer (CFRP) composites. Composites Part B: Engineering, 2023, 266: 111037.
[J5] Linfeng Li, Jinyang Xu*, Guoqiang Guo, Munish Kumar Gupta, Ming Chen. Wear behavior of different coated tools in MQL-assisted milling of magnesium-based rare-earth alloys. Journal of Materials Research and Technology, 2023, Accepted, DOI: https://doi.org/10.1016/j.jmrt.2023.10.003
[J6] Jinyang Xu*, Norbert Geier, Jiaxin Shen, Vijayan Krishnaraj, S. Samsudeensadham. A review on CFRP drilling: fundamental mechanisms, damage issues, and approaches toward high-quality drilling. Journal of Materials Research and Technology, 2023, 24: 9677-9707.
[J7] Jinyang Xu*, Vitalii Kolesnyk, Changping Li, Bohdan Lysenko, Jozef Peterka, Munish Kumar Gupta. A critical review addressing conventional twist drilling mechanisms and quality of CFRP/Ti stacks. Journal of Materials Research and Technology, 2023, 24: 6614-6651.
[J8] Jinyang Xu*, Xiaoming Zhang, Jingyu Dai, Dedong Yu, Min Ji, Ming Chen. Biomimetic microtextured surfaces to improve tribological and antibacterial behaviors of 3Y-TZP ceramics. Journal of Materials Research and Technology, 2023, 23: 1360-1374.
[J9] Jinyang Xu*, Linfeng Li, Chenyi Jiang, Shaoming Pan. Study on milling performances of 3Y-TZP ceramics using PCD and PCBN tools. Materials and Manufacturing Processes, 2023, 38 (12): 1495-1513.
[J10] Jinyang Xu*, Linfeng Li, Norbert Geier, J. Paulo Davim, Ming Chen. Experimental study of drilling behaviors and damage issues for woven GFRP composites using special drills. Journal of Materials Research and Technology, 2022, 21: 1256-1273.
[J11] Jinyang Xu*. A review on tool wear issues in drilling CFRP laminates. Frontiers in Materials, 2022, 9: 990773.
[J12] Jinyang Xu*, Linfeng Li, Tieyu Lin, Munish Kumar Gupta, Ming Chen. Machinability analysis in high-speed milling of AlSi7Mg alloys under EMQL conditions: An approach toward sustainable manufacturing. Journal of Manufacturing Processes, 2022, 81: 1005-1017.
[J13] Jinyang Xu*, Youkang Yin, J. Paulo Davim, Linfeng Li, Min Ji, Norbert Geier, Ming Chen. A critical review addressing drilling-induced damage of CFRP composites. Composite Structures, 2022, 294: 115594.
[J14] Jinyang Xu*, Tieyu Lin, J. Paulo Davim. On the machining temperature and hole quality of CFRP laminates when using diamond-coated special drills. Journal of Composites Science, 2022, 6 (2): 45.
[J15] Jinyang Xu, Tieyu Lin, Linfeng Li, Min Ji*, J. Paulo Davim, Norbert Geier, Ming Chen. Numerical study of interface damage formation mechanisms in machining CFRP/Ti6Al4V stacks under different cutting sequence strategies. Composite Structures, 2022, 285: 115236.
[J16] Jinyang Xu*, Linfeng Li, Ming Chen, J. Paulo Davim. An experimental investigation on milling features of fully-sintered zirconia ceramics using PCD tools. Materials and Manufacturing Processes, 2022, 37 (3): 318-326.
[J17] Jogendra Kumar, Kumar Abhishek, Jinyang Xu, Rajesh Kumar Verma*. Experimental investigation on machine-induced damages during the milling test of graphene/carbon incorporated thermoset polymer nanocomposites. Journal of Composites Science, 2022, 6 (3): 77.
[J18] Norbert Geier*, Dániel István Poór, Csongor Pereszlai, Péter Tamás-Bényei, Jinyang Xu. A drilling case study in polymer composites reinforced by virgin and recycled carbon fibres (CFRP and rCFRP) to analyse thrust force and torque. International Journal of Advanced Manufacturing Technology, 2022, 120 (3): 2603-2615.
[J19] Vitalii Kolesnyk, Jozef Peterka, Oleksandr Alekseev, Anna Neshta, Jinyang Xu, Bohdan Lysenko, Martin Sahul, Jozef Martinovič, Jakub Hrbal. Application of ANN for analysis of hole accuracy and drilling temperature when drilling CFRP/Ti alloy stacks. Materials, 2022, 15 (5): 1940.
[J20] Jinyang Xu*, Linfeng Li, Tieyu Lin, and Ming Chen. Evaluation of diamond-coated tools in drilling high-strength CFRP composites. Journal of Superhard Materials, 44 (3): 216-225.
[J21] Jinyang Xu*, Linfeng Li, Min Ji, and Ming Chen. Study on PCD tool wear in hard milling of fully-sintered 3Y-TZP ceramics. Journal of Superhard Materials, 2022, 44 (4): 292-300.
[J22] Jinyang Xu*, Min Ji, Linfeng Li, and Ming Chen. Evaluation of polycrystalline diamond tools in milling of pre-sintered and fully-sintered zirconia ceramics. Journal of Superhard Materials, 2022, 44 (1): 62-69.
[J23] Jinyang Xu*, Min Ji, Linfeng Li, Yi Wu, Qi Yu, Ming Chen. Improving wettability, antibacterial and tribological behaviors of zirconia ceramics through surface texturing. Ceramics International, 2022, 48 (3): 3702-3710.
[J24] Min Ji, Jinyang Xu*, Linfeng Li, Dedong Yu, Ming Chen, Norbert Geier, Mohamed El Mansori. Investigation of material removal mechanisms and ductile-brittle transition zone of zirconia ceramics sintered at various temperatures. Journal of the Mechanical Behavior of Biomedical Materials, 2022, 125: 104944.
[J25] Min Ji, Jinyang Xu*, Linfeng Li, Dedong Yu, Ming Chen, Mohamed El Mansori. Nano-scale mechanical behaviors and material removal mechanisms of zirconia ceramics sintered at various temperatures. Ceramics International, 2021, 47 (23): 32588-32598.
[J26] Min Ji, Jinyang Xu*, Dedong Yu, Ming Chen, Mohamed El Mansori. Influence of sintering temperatures on material properties and corresponding milling machinability of zirconia ceramics. Journal of Manufacturing Processes, 2021, 68: 646-656.
[J27] Min Ji, Heng Zhang, Jinyang Xu*, Chao Li, Dedong Yu, Ming Chen, Mohamed El Mansori. Toward the mechanisms of surface texturing on the wear behavior of dental zirconia ceramics under dry and saliva lubricated conditions. Wear, 2021, 484-485: 203845.
[J28] Dániel István Poór, Norbert Geier*, Csongor Pereszlai, Jinyang Xu*. A critical review of the drilling of CFRP composites: Burr formation, characterisation and challenges. Composites Part B: Engineering, 2021; 223: 109155.
[J29] Norbert Geier*, Jinyang Xu, Csongor Pereszlai, Dániel István Poór, J. Paulo Davim. Drilling of carbon fibre reinforced polymer (CFRP) composites: Difficulties, challenges and expectations. Procedia Manufacturing, 2021; 54: 284-289.
[J30] Qiang Fu, Shujing Wu*, Changhe Li, Jinyang Xu, Dazhong Wang. Delamination and chip breaking mechanism of orthogonal cutting CFRP/Ti6Al4V composite. Journal of Manufacturing Processes, 2022; 73: 183-196.
[J31] Luqiang Tu, Weiwei Ming*, Xingwei Xu, Chongyan Cai, Jie Chen, Qinglong An, Jinyang Xu, Ming Chen. Wear and failure mechanisms of SiAlON ceramic tools during high-speed turning of nickel-based superalloys. Wear, 2022; 488-489: 204171.
[J32] Luqiang Tu, Jie Chen, Qinglong An, Weiwei Ming, Jinyang Xu, Ming Chen*, Liangliang Lin, Zhenming Yang. Machinability improvement of compacted graphite irons in milling process with supercritical CO2-based MQL. Journal of Manufacturing Processes, 2021; 68: 154-168.
[J33] Tieyu Lin, Jinyang Xu*, Min Ji, Ming Chen. Drilling performance of uncoated brad spur tools for high-strength carbon fiber-reinforced polymer laminates. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2021, 235 (8): 1879-1889.
[J34] Jinyang Xu*, Tieyu Lin, J. Paulo Davim, Ming Chen, Mohamed El Mansori. Wear behavior of special tools in the drilling of CFRP composite laminates. Wear, 2021, 476: 203738.
[J35] Jinyang Xu*, Tieyu Lin, Ming Chen, J. Paulo Davim. Machining responses of high-strength carbon/epoxy composites using diamond-coated brad spur drills. Materials and Manufacturing Processes, 2021, 36 (6): 722-729.
[J36] Weiwei Ming, Xianghui Huang, Min Ji, Jinyang Xu*, Fan Zou, Ming Chen. Analysis of cutting responses of Sialon ceramic tools in high-speed milling of FGH96 superalloys. Ceramics International, 2021, 47 (1): 149-156.
[J37] Xianghui Huang, Fan Zou, Weiwei Ming*, Jinyang Xu, Yun Chen, Ming Chen. Wear mechanisms and effects of monolithic Sialon ceramic tools in side milling of superalloy FGH96. Ceramics International, 2020, 46 (17): 26813-26822.
[J38] Jinyang Xu*, Ming Chen, J. Paulo Davim, Mohamed El Mansori. A review on the machinability of aerospace-grade CFRP/titanium stacks. Advanced Materials Letters, 2021, 12 (1): 21011591.
[J39] Jinyang Xu*, Xianghui Huang, Ming Chen, J. Paulo Davim. Drilling characteristics of carbon/epoxy and carbon/polyimide composites. Materials and Manufacturing Processes, 2020, 35 (15): 1732-1740.
[J40] Jinyang Xu*, Min Ji, Ming Chen, Mohamed El Mansori. Experimental investigation on drilling machinability and hole quality of CFRP/Ti6Al4V stacks under different cooling conditions. International Journal of Advanced Manufacturing Technology, 2020, 109 (5-6): 1527-1539.
[J41] Jinyang Xu*, Xianghui Huang, J. Paulo Davim, Min Ji, Ming Chen. On the machining behavior of carbon fiber reinforced polyimide and PEEK thermoplastic composites. Polymer Composites, 2020, 41 (9): 3649-3663.
[J42] Jinyang Xu*, Min Ji, J. Paulo Davim, Ming Chen, Mohamed El Mansori, Vijayan Krishnaraj. Comparative study of minimum quantity lubrication and dry drilling of CFRP/titanium stacks using TiAlN and diamond coated drills. Composite Structures, 2020, 234: 111727.
[J43] Jinyang Xu*, Chao Li, Ming Chen*, Mohamed El Mansori, J. Paulo Davim. On the analysis of temperatures, surface morphologies and tool wear in drilling CFRP/Ti6Al4V stacks under different cutting sequence strategies. Composite Structures, 2020, 234: 111708.
[J44] Jinyang Xu*, Min Ji, Ming Chen. On the quantitative analysis of drill edge wear when machining CFRP/Ti6Al4V stacks. International Journal of Advanced Manufacturing Technology, 2020, 108 (5-6): 1463-1472.
[J45] Min Ji, Jinyang Xu*, Ming Chen, Mohamed El Mansori. Enhanced hydrophilicity and tribological behavior of dental zirconia ceramics based on picosecond laser surface texturing. Ceramics International, 2020, 46 (6): 7161-7169.
[J46] Min Ji, Jinyang Xu*, Ming Chen, Mohamed El Mansori. Effects of different cooling methods on the specific energy consumption when drilling CFRP/Ti6Al4V stacks. Procedia Manufacturing, 2020, 43: 95-102.
[J47] Xianghui Huang, Jinyang Xu, Ming Chen*, Fei Ren. Finite element modeling of high-speed milling 7050-T7451 alloys. Procedia Manufacturing, 2020, 43: 471-478.
[J48] Jinyang Xu*, Min Ji, Ming Chen, Fei Ren. Investigation of minimum quantity lubrication effects in drilling CFRP/Ti6Al4V stacks. Materials and Manufacturing Processes, 2019, 34 (12): 1401-1410.
[J49] Jinyang Xu*, Chao Li, Ming Chen, Fei Ren. A comparison between vibration assisted and conventional drilling of CFRP/Ti6Al4V stacks. Materials and Manufacturing Processes, 2019, 34 (10): 1182-1193.
[J50] Jinyang Xu*, Lei Zhou, Ming Chen, Fei Ren. Experimental study on mechanical drilling of carbon/epoxy composite-Ti6Al4V stacks. Materials and Manufacturing Processes, 2019, 34 (7): 715-725.
[J51] Jinyang Xu*, Mohamed El Mansori, Julien Voisin, Ming Chen, Fei Ren. On the interpretation of drilling CFRP/Ti6Al4V stacks using the orthogonal cutting method: Chip removal mode and subsurface damage formation. Journal of Manufacturing Processes, 2019, 44: 435-447.
[J52] Jinyang Xu*, Mohamed El Mansori, Ming Chen, Fei Ren. Orthogonal cutting mechanisms of CFRP/Ti6Al4V stacks. International Journal of Advanced Manufacturing Technology, 2019, 103 (9-12): 3831-3851.
[J53] Jinyang Xu*, Chao Li, Ming Chen, Mohamed El Mansori, Fei Ren. An investigation of drilling high-strength CFRP composites using specialized drills. International Journal of Advanced Manufacturing Technology, 2019, 103 (9-12): 3425-3442.
[J54] Chao Li, Jinyang Xu*, Ming Chen, Qinglong An, Mohamed El Mansori, Fei Ren. Tool wear processes in low frequency vibration assisted drilling of CFRP/Ti6Al4V stacks with forced air-cooling. Wear, 2019, 426-427: 1616-1623.
[J55] Jinyang Xu*, Mohamed El Mansori. Numerical study on the chip removal and surface quality of CFRP/Ti6Al4V stacks. Indian Journal of Engineering and Materials Sciences, 2019, 26 (5-6): 369-378.
[J56] Jinyang Xu*, Chao Li, Jiaqiang Dang, Mohamed El Mansori, Fei Ren. A study on drilling high-strength CFRP laminates: Frictional heat and cutting temperature. Materials, 2018, 11 (12): 2366.
[J57] Jinyang Xu*, Chao Li, Sipei Mi, Qinglong An, Ming Chen. Study of drilling-induced defects for CFRP composites using new criteria. Composite Structures, 2018, 201: 1076-1087.
[J58] Jinyang Xu*, Chao Li, Mohamed El Mansori, Gongyu Liu, Ming Chen. Study on the frictional heat at tool-work interface when drilling CFRP composites. Procedia Manufacturing, 2018, 26: 415-423.
[J59] Chao Li, Jinyang Xu*, Ming Chen. Effects of specialized drill bits on hole defects of CFRP laminates. AIP Conference Proceedings, 2018, 1960 (1): 070017.
[J60] Jinyang Xu*, Mohamed El Mansori. Wear characteristics of polycrystalline diamond tools in orthogonal cutting of CFRP/Ti stacks. Wear, 2017, 376-377: 91-106.
[J61] Jinyang Xu*, Qinglong An, Ming Chen. An experimental investigation on cutting-induced damage when drilling high-strength T800S/250F carbon fiber-reinforced polymer. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2017, 231 (11): 1931-1940.
[J62] Jinyang Xu*, Mohamed El Mansori. Experimental study on drilling mechanisms and strategies of hybrid CFRP/Ti stacks. Composite Structures, 2016, 157: 461-482.
[J63] Jinyang Xu*, Ali Mkaddem, Mohamed El Mansori. Recent advances in drilling hybrid FRP/Ti composite: a state-of-the-art review. Composite Structures, 2016, 135: 316-338.
[J64] Jinyang Xu*, Qinglong An, Ming Chen. A comparative evaluation of polycrystalline diamond drills in drilling high-strength T800S/250F CFRP. Composite Structures, 2014, 117: 71-82.
[J65] Jinyang Xu*, Mohamed El Mansori, Julien Voisin. Numerical modeling and FE analysis of CFRP/Ti stack orthogonal cutting. Procedia CIRP, 2016, 46 (1): 67-70.
[J66] Jinyang Xu*, Mohamed El Mansori. Experimental studies on the cutting characteristics of hybrid CFRP/Ti stacks. Procedia Manufacturing, 2016, 5 (1): 270-281.
[J67] Jinyang Xu*, Mohamed El Mansori. Cutting modeling of hybrid CFRP/Ti composite with induced damage analysis. Materials, 2016, 9 (1): 1-22.
[J68] Jinyang Xu*, Mohamed El Mansori. Numerical studies of frictional responses when cutting hybrid CFRP/Ti composite. International Journal of Advanced Manufacturing Technology, 2016, 87 (1-4): 657-675.
[J69] Jinyang Xu*, Mohamed El Mansori. Numerical modeling of stacked composite CFRP/Ti machining under different cutting sequence strategies. International Journal of Precision Engineering and Manufacturing, 2016, 17 (1): 99-107.
[J70] Jinyang Xu*, Mohamed El Mansori. An experimental investigation on orthogonal cutting of hybrid CFRP/Ti stacks. AIP Conference Proceedings, 2016, 1769: 080002.
[J71] Jinyang Xu*, Mohamed El Mansori. Orthogonal cutting modeling of hybrid CFRP/Ti toward specific cutting energy and induced damage analyses. AIP Conference Proceedings, 2016, 1769: 080001.
[J72] Jinyang Xu*, Mohamed El Mansori. Finite element analysis when orthogonal cutting of hybrid composite CFRP/Ti. IOP Conference Series: Materials Science and Engineering, 2015, 87 (1): 012059.
[J73] Jinyang Xu*, Mohamed El Mansori. Cutting modeling using cohesive zone concept of titanium/CFRP composite stacks. International Journal of Precision Engineering and Manufacturing, 2015, 16 (10): 2091-2100.
[J74] Jinyang Xu, Qinglong An, Ming Chen*. Analysis on milling performance of 2024-T351 aluminum alloy using TiAlN coated carbide cutting tools. Materials Science Forum, 2012, 697-698: 218-222.
[J75] Jinyang Xu, Zhiqiang Liu, Qinglong An, Ming Chen*. Wear mechanism of high-speed turning Ti-6Al-4V with TiAlN and AlTiN coated tools in dry and MQL conditions. Advanced Materials Research, 2012, 497: 30-34.
[J76] Jinyang Xu, Qinglong An, Ming Chen*. Experimental study on high-speed turning of free-cutting steel AISI 12L14 using multilayer coated carbide tools. Advanced Materials Research, 2012, 500: 3-7.
[J77] Jinyang Xu, Qinglong An, Xiaojiang Cai, Ming Chen*. Drilling machinability evaluation on new developed high-strength T800S/250F CFRP laminates. International Journal of Precision Engineering and Manufacturing, 2013, 14 (10): 1687-1696.
[J78] Jinyang Xu, Zhiqiang Liu, Guoqiang Guo, Ming Chen*. An investigation on wear mechanism of high-speed turning of free-cutting steel AISI 1215 using uncoated and multi-layer coated tools. International Journal of Advanced Manufacturing Technology, 2013, 67 (1-4): 517-533.
[J79] Zhiqiang Liu, Jinyang Xu, Shu Han, Ming Chen*. A coupling method of response surfaces (CRSM) for cutting parameters optimization in machining titanium alloy under minimum quantity lubrication (MQL) condition. International Journal of Precision Engineering and Manufacturing, 2013, 14 (5): 693-702.
[J80] Qinglong An*, Jinyang Xu, Yingying Wei, Ming Chen. An optimization investigation on surface roughness and its evolution with tool wear in dry turning of boron alloy cast iron. Indian Journal of Engineering and Materials Sciences, 2014, 21 (6): 601-608.
[J81] Qinglong An*, Changying Wang, Jinyang Xu, Pulin Liu, Ming Chen. Experimental investigation on hard milling of high strength steel using PVD-AlTiN coated cemented carbide tool. International Journal of Refractory Metals and Hard Materials, 2014, 43: 94-101.
[J82] Zhiqiang Liu, Qinglong An, Jinyang Xu, Ming Chen*, Shu Han. Wear performance of (nc-AlTiN)/(a-Si3N4) coating and (nc-AlCrN)/(a-Si3N4) coating in high-speed machining of titanium alloys under dry and Minimum Quantity Lubrication (MQL) conditions. Wear, 2013, 305 (1-2): 249-259.
[J83] Qinglong An*, Xiaojiang Cai, Jinyang Xu, Ming Chen. Experimental investigation on drilling of high strength T800S/250F CFRP with twist and dagger drill bits. International Journal of Abrasive Technology, 2014, 6 (3): 183-196.
[J84] 徐锦泱，郑小虎，安庆龙，陈明. 高速铣削TC6钛合金的刀具磨损机理[J]. 上海交通大学学报，2012，46 (7)：1037-1042.
[J85] 徐锦泱，蔡晓江，魏莹莹，安庆龙，陈明. 高强度型T800S/250F CFRP的制孔缺陷研究[J]. 制造技术与机床，2013，(3)：97-101.
[J86] 徐锦泱，刘志强，安庆龙，陈明. 高速车削AISI 12L14易切削钢的刀具磨损机理研究[J]. 机床与液压，2013，41 (13)：5-8.

【Int. Conf. Proceedings】
[C1] J. Xu*, L. Zhou, M. Chen, Q. An, M. El Mansori, F. Ren. Study on tool wear signature and its impact on hole quality of CFRP/Ti stacks. The 22nd International Conference on Wear of Materials (WOM2019), Miami, Florida, USA, 14-18 April, 2019.
[C2] J. Xu*, C. Li, M. El Mansori, G. Liu, M. Chen. Study on the frictional heat at tool-work interface when drilling CFRP composites. The 46th SME North American Manufacturing Research Conference (NAMRI/SME46), Texas, USA, 18 - 22 June, 2018.
[C3] S. Mi, J. Xu*, L. Zhou, Q. An, W. Ming, M. Chen. Experimental analysis of hole quality in drilling CFRP/Ti stacks. The 13th Asia-Pacific Conference on Materials Processing (APCMP2018), Sydney, Australia, 23 - 27 August, 2018.
[C4] C. Li, J. Xu*, M. Chen. Effects of specialized drill bits on hole defects of CFRP laminates. The 21st International ESAFORM Conference on Material Forming, Palermo, Italy, 23 - 25 April, 2018.
[C5] J. Xu*, Q. An, W. Ming, M. Chen. A study on the effects of cutting-sequence strategies in drilling CFRP/Ti. The 20th International Symposium on Advances in Abrasive Technology (ISAAT2017), Okinawa, Japan, 3 - 6 December, 2017.
[C6] J. Xu*, M. Chen, Q. An, W. Ming, M. El Mansori. Chip formation in orthogonal trimming of metallic-composite stacks. The 13th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2017), Shanghai, China, 19 - 21 November, 2017.
[C7] C. Li, J. Xu*, Q. An, M. Chen. Effects of specialized drills on hole defects of CFRP laminates. The 13th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2017), Shanghai, China, 19 - 21 November, 2017.
[C8] G. Liu, J. Xu*, Q. An, M. Chen. Experimental investigation on flank milling section of thin-wall plates with different tool inclination angles. The 13th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2017), Shanghai, China, 19 - 21 November, 2017.
[C9] J. Chen, M. Chen*, Q. An, W. Ming, J. Xu. Wear mechanisms and performance of different coated tools in high-speed machining of TC4 under dry and MQL conditions. The 20th International Symposium on Advances in Abrasive Technology (ISAAT2017), Okinawa, Japan, 3 - 6 December, 2017.
[C10] M. Gao*, W. Ming, J. Xu, Q. An, M. Chen. Study on the difference of milling performance between laser sintering titanium alloy and forging titanium alloy. The 13th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2017), Shanghai, China, 19 - 21 November, 2017.
[C11] J. Xu*, M. El Mansori. Wear characteristics of polycrystalline diamond tools when orthogonal cutting CFRP/Ti stacks. The 21st International Conference on Wear of Materials (WOM2017), Long Beach, California, USA, 26 - 30 March, 2017.
[C12] J. Xu*, M. El Mansori. Experimental studies on the cutting characteristics of hybrid CFRP/Ti stacks. The 44th SME North American Manufacturing Research Conference (NAMRI/SME44), Virginia, USA, June 27 - July 1, 2016.
[C13] J. Xu*, M. El Mansori, J. Voisin. Numerical modeling and FE analysis of CFRP/Ti stack orthogonal cutting. The 7th CIRP Conference on High Performance Cutting, Chemnitz, Germany, May 31 - June 2, 2016.
[C14] J. Xu*, M. El Mansori. An experimental investigation on orthogonal cutting of hybrid CFRP/Ti stacks. The 19th International ESAFORM Conference on Material Forming, Nantes, France, 27 - 29 April, 2016.
[C15] J. Xu*, M. El Mansori. Orthogonal cutting modeling of hybrid CFRP/Ti toward specific cutting energy and induced damage analyses. The 19th International ESAFORM Conference on Material Forming, Nantes, France, 27 - 29 April, 2016.
[C16] J. Xu*, M. El Mansori. Numerical modeling of hybrid composite (CFRP/Ti) cutting under different cutting-sequence strategies. 2015 International Symposium on Green Manufacturing and Applications (ISGMA2015), Qingdao, China, 23 - 27 June, 2015.
[C17] J. Xu*, M. El Mansori. Modeling of CFRP/Ti interface when drilling hybrid composite. The 18th International Conference on Composite Structures (ICCS18), Lisbon, Portugal, 15 - 18 June, 2015.
[C18] J. Xu*, M. El Mansori. Finite element analysis when orthogonal cutting hybrid composite CFRP/Ti. 2015 Global Conference on Polymer and Composite Materials (PCM2015), Beijing, China, 16-19 May, 2015.
[C19] J. Xu, Q. An, M. Chen. Experimental study on high-speed turning of free-cutting steel AISI 12L14 using multilayer coated carbide tools. The 10th Asia-Pacific Conference on Materials Processing (APCMP2010), Jinan, China, 14 - 17June, 2012.
[C20] J. Xu, Z. Liu, Q. An, M. Chen. Wear mechanism of high-speed turning Ti-6Al-4V with TiAlN and AlTiN coated tools in dry and MQL conditions. The 8th China-Japan Conference on Ultra-Precision Machining Process (CJUMP 2011), Hangzhou, China, 20 - 22 November, 2011.
[C21] J. Xu, Q. An, M. Chen. Analysis on milling performance of 2024-T351 aluminum alloy using TiAlN coated carbide cutting tools. The 14th International Manufacturing Conference in China (IMCC2011), Tianjin, China, 13 - 15 October, 2011.
[C22] Q. An, J. Xu, X. Cai, M. Chen. Experimental investigation on drilling force and hole quality when drilling of T800S/250F CFRP laminate. The 16th International Symposium on Advances in Abrasive Technology (ISAAT2013), Hangzhou, China, 23 - 26 September, 2013.
[C23] Y. Wei, J. Xu, X. Cai, Q. An, M. Chen. Effect of drills with different drill bits on delamination in drilling composite materials. The 12th Conference on Machining & Advanced Manufacturing Technology in China (CMAMT2013), Xiamen, China, 24 - 27 July, 2013.
[C24] M. Chen, J. Xu, Z. Liu, Q. An. Machinability study on hard milling of ultra-high strength steel 30Cr3SiNiMoVA. The 15th International Symposium on Advances in Abrasive Technology (ISAAT2012), Singapore, September, 2012.
[C25] Q. An, J. Xu, M. Chen. Experimental investigation on high-speed hard milling of 30Cr3SiNiMoVA using TiAlN coated carbide tool. The 9th International Conference on High-speed Machining–CIRP, San Sebastian, Spain, 7 - 8 March, 2012.

1. Course Name: Design and Manufacturing II
Lecturing Language: Chinese
Lecturing Hours: 64
Credits: 4
Target Students: Undergraduate students

2. Course Name: Advanced Composites and Their Manufacturing Techniques
Lecturing Language: English
Lecturing Hours: 48
Credits: 3
Target Students: Postgraduate students

3. Course Name: Modern Control Theory
Lecturing Language: Chinese
Lecturing Hours: 48
Credits: 3
Target Students: Postgraduate students

4. Course Name: Intelligent Manufacturing Technology and System
Lecturing Language: Chinese
Lecturing Hours: 32
Credits: 2
Target Students: Postgraduate students

国家发明专利
1. 徐锦泱，冀敏，李林峰，陈明. 延性域去除尺度提升的3Y-TZP氧化锆陶瓷烧结方法，专利号：ZL202210930784.2，授权日：2023年4月11日.
2. 陈明，李超，安庆龙，徐锦泱，明伟伟，马海善. 缸盖铝屑清洗装置，专利号：ZL201911107452.9，授权日：2021年5月28日.
3. 安庆龙，王丹伟，明伟伟，徐锦泱，陈明，马海善. 碳纤维增强复合材料/钛合金叠层钻削刀具寿命测定方法，专利号：ZL201910467032.5，授权日：2021年6月25日.
4. 陈明，郭立杰，党嘉强，刘公雨，张崇印，徐锦泱，任斐，安庆龙，明伟伟. 自动打磨装置及方法，专利号：ZL201811059948.9，授权日：2020年9月29日.
5. 陈明，任斐，陶正瑞，刘公雨，张崇印，徐锦泱，郭立杰，安庆龙，明伟伟. 金属表面涂镀层厚度的非接触式测量方法及装置，专利号：ZL201811074878.4，授权日：2020年12月08日.
6. 陈明，徐锦泱，冀敏，夏天成，李卓龙，马海善. 高亲水性氧化锆陶瓷义齿制备方法，申请号：CN202010624923.X，公开号：CN111789689A，公开日：2020年10月26日.
7. 陈明，徐锦泱，林铁宇，冀敏，马海善. 无监督模型的刀具磨损监测方法及系统，申请号：CN202011045281.4，公开号：CN112192319A，公开日：2021年1月14日.
8. 陈明，李超，徐锦泱，安庆龙，明伟伟，马海善. 桁架复合刀库，申请号：CN202011066359.0，申请日：2020年9月30日.
9. 陈明，李超，徐锦泱，安庆龙，明伟伟，马海善. 多刀柄兼容的抓手结构，申请号：CN202011058546.4，申请日：2020年9月30日.
10. 陈明，李超，徐锦泱，安庆龙，明伟伟，马海善. 用于低频振动钻削加工切屑实时收集的风冷设备，申请号：CN201910467033.X，公开号：CN110039370A，公开日：2019年7月23日.
11. 陈明，李超，徐锦泱，安庆龙，明伟伟，马海善. 碳纤维复合材料钻孔缺陷定量评价方法，申请号：CN201911107453.3，公开号：CN 110794037 A，公开日：2020年2月20日.
12. 符国建，孟漪，陈明，马海善，冀敏，安庆龙，徐锦泱，明伟伟. 用于激光切割金属残屑的预处理装置，申请日：2019年9月17日.

【Editor-in-Chief of International Journals】
International Journal of Precision Technology (IJPTech)
International Journal of Product Sound Quality (IJPSQ)
Journal of Coating Science and Technology (JCST)

【Associate Editor of International Journals】
Proc Inst Mech Eng Pt E - J Process Mech Eng (Indexed by SCI, EI, SCOPUS, etc.)
Simulation – Trans Soc Mod Sim Int (Indexed by SCI, EI, SCOPUS, etc.)
Frontiers in Materials (Indexed by SCI, EI, SCOPUS, etc.)
Int. J. Manuf., Mater., & Mech. Eng. (Indexed by ESCI, SCOPUS, etc.)
Int. J. Surf. Eng. & Interdiscip. Mater. Sci. (Indexed by SCOPUS, etc.)

【Academic Editors and Board Members of SCI/ESCI/EI Journals】
Youth Editor, International Journal of Extreme Manufacturing (Indexed by SCI, EI, SCOPUS, etc.)
Academic Editor, International Journal of Aerospace Engineering (Indexed by SCI, EI, SCOPUS, etc.)
Editorial Board, Green Materials (Indexed by SCI, EI, SCOPUS, etc.)
Editorial Board, Journal of Superhard Materials (Indexed by SCI, EI, SCOPUS, etc.)
Editorial Board, Journal of Composites Science (Indexed by ESCI, SCOPUS, etc.)
Editorial Board, Lubricants (Indexed by SCI, SCOPUS, etc.)
Editorial Board, Coatings (Indexed by SCI, SCOPUS, etc.)
Editorial Board Member, Current Materials Science (Indexed by EI, SCOPUS, etc.)
Editorial Board Member, Current Mechanics and Advanced Materials (CMAM)
Editorial Board Member, Tribology in Industry (Indexed by SCOPUS, etc.)
Youth Editorial Board Member, Surface Technology (Indexed by EI) (in Chinese)

【Advisory Committee of International Conferences】
1. Technical Advisory Committee of The 4th International Conference on Lightweight Materials & Engineering Structures (LIMAS2025, Holiday Inn, Sutton, London, UK, July 2-3, 2025)
2. Editor of The 5th International Conference on Mechanical Engineering and Materials (ICMEM2024, Wuhan, China, November 15-16, 2024, Website: https://www.icmem.cn)
3. General Chair/Publication Editor of The 3rd International Conference on New Materials, Machinery and Vehicle Engineering (NMMVE2024, Dalian, China, July 19-21, 2024, Website: http://www.nmmve.org)
4. Program Committee/Keynote Speaker/Editor of The 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE2024, Pilsen, Czech Republic, June 4-7, 2024, Website: https://dsmie.sumdu.edu.ua/committees/program-committee.html)
5. International Scientific Committee of The 2nd International Conference on Engineering Manufacturing (ICEM2024, Porto, Portugal, May 9-10, 2024, Website: https://www.fe.up.pt/emconference/2024)
6. Editor/Technical Program Committee of The 4th International Conference on Mechanical Engineering and Materials (ICMEM2023, Wuhan, China, November 2-4, 2023, Website: https://www.icmem.cn)
7. Guest Editor of The 2nd International Conference on Mechatronics and Automation Technology (ICMAT2023, Wuhan, China, October 28-29, 2023, Website: https://www.matconf.net)
8. International Scientific Committee of The 2nd International Conference on Machine Design (ICMD2023, Porto, Portugal, September 7-8, 2023, Website: https://www.md-conferences.com/home)
9. Organizing Committee of The 17th Conference on Machining & Advanced Manufacturing Technology (CMAMT2023, Shenyang, China, August 2-4, 2023)
10. Program Committee of The 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE2023, High Tatras, Slovak Republic, June 6-9, 2023, Website: https://dsmie.sumdu.edu.ua/home/archive/dsmie-2023.html)
11. General Chair/Keynote Speaker/Publication Editor of The 2nd International Conference on New Materials, Machinery and Vehicle Engineering (NMMVE2023, Guiyang, China, June 2-4, 2023, Website: http://www.nmmve.org/past-event)
12. Editor/Technical Program Committee of The 3rd International Conference on Mechanical Engineering and Materials (ICMEM2022, Nanchang, China, November 18-19, 2022, Website: http://2022.icmem.cn)
13. Chair/Keynote Speaker/Conference Committee Chair Member of The 4th International Conference on Modeling, Simulation, Optimization and Algorithm (ICMSOA2022, Sanya, China, November 11-13, 2022, Website: http://www.icmsoa.com)
14. Guest Editor of The 1st International Conference on Mechatronics and Automation Technology (ICMAT2022, Virtual Online, China, October 29-30, 2022, Website: https://www.matconf.net)
15. Plenary Speaker/Session Chair/Scientific Committee of The 12th International Advances in Applied Physics & Materials Science Congress & Exhibition (APMAS2022, Ölüdeniz, Turkey, October 13-19, 2022, Website: http://www.apmascongress.org/speakers/committees)
16. Publication Editor/Scientific Committee of The 3rd International Conference on Energy, Material Science and Environmental Engineering (ICEMSEE2022, Wuhan, China, August 19-21, 2022, Website: http://www.icemsee.com)
17. International Scientific Committee of The 1st International Conference on Engineering Manufacturing (ICEM2022, Porto, Portugal, May 5-6, 2022, Website: https://www.fe.up.pt/emconference/2022)
18. Keynote Speaker/Chair of The 2022 International Webinars of Surface Technology & Application – Precision and Ultra-Precision Machining (IWSTA2022, March 22, 2022, Online Webinar)
19. Technical Chair/Keynote Speaker/Publication Editor of The 1st International Conference on New Materials, Machinery and Vehicle Engineering (NMMVE2022, Guilin, China, March 18-20, 2022, Website: http://www.nmmve.org/past-event)
20. Technical Advisory Committee/Invited Speaker of The 3rd International Conference on Lightweight Materials & Engineering Structures (LIMAS2021, Glasgow, UK, November 22-23, 2021)
21. Editor/Technical Program Committee of The 2nd International Conference on Mechanical Engineering and Materials (ICMEM2021, Beijing, China, November 19-20, 2021, Website: http://2021.icmem.cn)
22. Chair/Keynote Speaker/Conference Committee Chair Member of The 3rd International Conference on Modeling, Simulation, Optimization and Algorithm (ICMSOA2021, Sanya, China, November 12-14, 2021, Website: http://www.yaseen.org.cn/NewsDetail.aspx?ID=86)
23. Guest Editor of The 9th International Conference on Metallurgy Technology and Materials (ICMTM2021, Zhengzhou, China, October 28-29, 2021, Website: http://www.icmtm.org)
24. Plenary Speaker/Session Chair/Scientific Committee of The 11th International Advances in Applied Physics & Materials Science Congress & Exhibition (APMAS2021, Ölüdeniz, Turkey, October 17-23, 2021, Website: http://2021.apmascongress.org/speakers/committees)
25. Session Chair/International Scientific Committee of The 1st International Conference on Machine Design (ICMD2021, Porto, Portugal, September 9-10, 2021, Website: https://www.md-2021.com)
26. Organizing Committee of The 16th Conference on Machining & Advanced Manufacturing Technology & The 40th Anniversary Celebration of the Chinese Society of Advanced Manufacturing Technology (CMAMT&CSAMT, Jinan, China, July 31-August 1, 2021)
27. Session Chair/Academic Committee of The 7th National Composites Innovation and Application Technology Conference (NCIATC2021, Harbin, China, June 18-20, 2021, Website: http://www.chinamaterial.org.cn/activities/detail/?3287.html)
28. International Scientific Committee of The 30th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM2021, Athens, Greece, June 15-18, 2021, Website: https://www.faimconference.org)
29. Editor/Technical Program Committee of The 1st International Conference on Mechanical Engineering and Materials (ICMEM2020, Beijing, China, October 16-17, 2020, Website: https://www.icmem.cn/icmem2020)
30. Invited Speaker/Session Chair/Scientific Committee of The 10th International Advances in Applied Physics & Materials Science Congress & Exhibition (APMAS2020, Ölüdeniz, Turkey, October 14-20, 2020, Website: http://2020.apmascongress.org/speakers/committees)
31. TPC Member/Lead Guest Editor of The 2020 International Conference on Energy, Material Science and Environment Engineering (ICEMSEE2020, Taipei, China, March 10-11, 2020, Website: http://www.icemsee.com/a/COMMITTEE)
32. Invited Speaker/International Scientific Advisory Board Member of The 2020 International Congress on Advanced Materials Sciences and Engineering (AMSE2020, Vienna, Austria, July 22-25, 2020, Website: https://www.istci.org/AMSE2020/OrganizingCommittee.asp)
33. Invited Speaker/International Committee Member of The 34th European Composite Materials Congress (ECMC2020, Stockholm, Sweden, June 09-11, 2020, Website: https://www.advancedmaterialscongress.org/cmc20)
34. Chair of the Special Symposium – “Manufacturing Engineering and Science” – The 2020 International Conference on Computational & Experimental Engineering and Sciences (ICCES2020, Montenegro, April 26-30, 2020, Website: http://www.iccesconf.org/s23-manufacturing-engineering-and-science-2)
35. Invited Speaker/Session Chair/Scientific Committee of The 9th International Advances in Applied Physics & Materials Science Congress & Exhibition (APMAS2019, Ölüdeniz, Turkey, October 22-28, 2019, Website: http://2019.apmascongress.org/speakers/committees)

【Lead Guest Editors of International Journals】
1. Jinyang Xu*. Guest Editor of the Special Issue – “Advances in Machining and Milling Technologies: Innovations, Applications, Management and Process Optimization” – Proc. IMechE Part E - Journal of Process Mechanical Engineering (SCI/EI, Website: https://journals.sagepub.com/page/pie/machiningandmilling)
2. Jinyang Xu*. Guest Editor of the Special Issue – “Manufacturing of Fibrous Composites for Engineering Applications, Volume II” – Journal of Composites Science (JCS, ESCI/SCOPUS, Website: https://www.mdpi.com/si/172505)
3. Jinyang Xu*. Lead Guest Editor of the Special Issue – “Current Research Advances in Aerospace Manufacturing Fields” – International Journal of Manufacturing Technology and Management (EI/SCOPUS, Website: https://www.inderscience.com/info/ingeneral/cfp.php?id=5755)
4. Jinyang Xu*. Lead Guest Editor of the Special Issue – “Composites Machining and Simulation” – Aeronautical Manufacturing Technology (Website: http://www.amte.net.cn/CN/volumn/volumn_1433.shtml, In Chinese)
5. Jinyang Xu*. Lead Guest Editor of the Special Issue – “Application of Artificial Intelligence in Mechatronics” – Applied Sciences (SCIE/SCOPUS, Website: https://www.mdpi.com/journal/applsci/special_issues/AI_Mechatronics)
6. Jinyang Xu*. Guest Editor of the Special Issue – “Novel Approaches in the Design, Simulation, and Manufacturing for Processes and Systems” – Materials (SCIE/EI/SCOPUS, Website: https://www.mdpi.com/si/165101)
7. Jinyang Xu*. Guest Editor of the Special Issue – “Structural Vibration: Analysis, Design, Control and Applications” – International Journal of Product Sound Quality (Website: https://www.inderscience.com/info/ingeneral/cfp.php?id=5629)
8. Jinyang Xu*. Guest Editor of the Special Issue – “Energy, Material Science and Environmental Engineering” – COATINGS (SCIE/SCOPUS, Website: https://www.mdpi.com/journal/coatings/special_issues/ICEMSEE)
9. Jinyang Xu*. Guest Editor of the Special Issue – “Manufacturing of Fibrous Composites for Engineering Applications” – Journal of Composites Science (JCS, ESCI/SCOPUS, Website: https://www.mdpi.com/si/95501)
10. Jinyang Xu*. Lead Guest Editor of the Special Issue – “Recent Advances in the Manufacturing of Polymeric Composites” – Advances in Materials Science and Engineering (AMSE, EI/SCOPUS, Website: https://onlinelibrary.wiley.com/doi/toc/10.1155/5928.si.348945)
11. Jinyang Xu*. Lead Guest Editor of the Special Issue – “Advanced Coating Materials for Machining Processes” – COATINGS (SCIE/SCOPUS, Website: https://www.mdpi.com/journal/coatings/special_issues/Advanced_Machining)
12. Jinyang Xu*. Lead Guest Editor of the Special Issue – “Experimental and Numerical Investigations in Mechanical Machining of Fibre-Reinforced Composite Materials” – Advances in Materials Science and Engineering (AMSE, EI/SCOPUS, Website: https://onlinelibrary.wiley.com/doi/toc/10.1155/5928.si.894031)

【Academic Organization Appointments & Review Experts】
2022 – Present, General Chair of the New Materials, Machinery and Vehicle Engineering (NMMVE) conference series
2020 – Present, National Committee and Deputy Secretary General of the Secretariat of Advanced Manufacturing Technology Research Branch of China Metal Cutting Tool Engineering Association
2020 – Present, Vice Chairman of Composite Materials Expert Committee of National Think Tank for Materials and Devices Scientists
2020 – Present, Member of International Ecological Economy Promotion Association (IEEPA)
2020 – Present, Member of Society for Modeling and Simulation International (SCS)
2020 – Present, Member of International Association of Advanced Materials (IAAM)
2014 – Present, Member of American Society of Mechanical Engineers (ASME)
2014 – Present, Member of Society of Manufacturing Engineers (SME)
2014 – Present, Member of Institution of Mechanical Engineers (IMechE)
2019 – Present, Review Expert of the NSFC (Natural Science Foundation of China) Fund Projects
2019 – Present, Review Expert of the Shanghai Science and Technology Projects, Shanghai Yangfan Talents and Pujiang Talents Programs
2019 – Present, Review Expert of the Hiwin Doctoral Dissertation Awards

【Regular Reviewers of International Journals and Conferences】
Composite Structures (SCI), Composites Part B-Engineering (SCI), Ceramics International (SCI), International Journal of Machine Tools and Manufacture (SCI), International Journal of Mechanical Sciences (SCI), International Journal of Fatigue (SCI), Journal of Materials Processing Technology (SCI), Journal of Manufacturing Science and Engineering - Transactions of the ASME (SCI), Journal of Manufacturing Processes (SCI), Journal of Manufacturing Systems (SCI), Journal of Materials Engineering and Performance (SCI), Journal of Materials Research and Technology (SCI), Transactions of the Canadian Society for Mechanical Engineering (SCI), Journal of Engineering (ESCI), Fibers and Polymers (SCI), Smart Materials and Structures (SCI), WEAR (SCI), Tribology International (SCI), Coatings (SCI), Materials (SCI), Machining Science and Technology (SCI), Mechanics of Advanced Materials and Structures (SCI), Metrology and Measurement Systems (SCI), SIMULATION - Transactions of The Society for Modeling and Simulation International (SCI), Advanced Engineering Materials (SCI), Advances in Manufacturing (SCI), Advances in Mechanical Engineering (SCI), Advances in Materials Science and Engineering (SCI), Advances in Civil Engineering (SCI), International Journal of Advanced Manufacturing Technology (SCI), Chinese Journal of Aeronautics (SCI), Proc Inst Mech Eng Pt B-J Eng Manuf (SCI), Proc Inst Mech Eng Pt C-J Mech Eng Sci (SCI), Materials Technology (SCI), APMAS, PCM, PCM, ICMS, etc.

Oct 2024 Supervisor of the Gold Award of China International College Students' Innovation Competition 2024 (Ranked 1st)
Sep 2024 The World's Top 2% Scientists by Stanford University
Jul 2024 Supervisor of the 2nd Prize in the 11th National Undergraduate Mechanical Innovation Design Competition (Ranked 2nd)
May 2024 Supervisor of the 1st Prize in the 13th Shanghai Undergraduate Mechanical Engineering Innovation Competition (Ranked 2nd)
Apr 2024 The Outstanding Contribution Award of MDPI
Feb 2024 The Excellent Reviewer of the journal - Manufacturing Technology & Machine Tool
Jan 2024 The Outstanding Youth Editor of the journal - Surface Technology
Jan 2024 Excellence rankings in the 2017 Annual Faculty/Staff Assessment of SJTU
Nov 2023 The First Prize of the 5th National Blended Teaching Design Innovation Competition for Universities
Oct 2023 The World's Top 2% Scientists by Stanford University
Aug 2023 Winner of the Best Report Award at the 17th Conference on Machining & Advanced Manufacturing Technology (CMAMT2023)
Jun 2023 The First Prize of Blended Teaching Design Innovation Competition of Shanghai Jiao Tong University
Jun 2023 Winner of the Best Paper Award at the NMMVE2023 conference
Dec 2022 Excellence rankings in the 2022 Annual Class Tutors Assessment of SJTU
Oct 2022 The World's Top 2% Scientists by Stanford University
Sep 2022 Fellow of International Association of Advanced Materials (FIAAM)
Apr 2022 Awardee of the Top Cited Author 2020-2021 of "Polymer Composites" in Wiley
Mar 2022 Winner of the Best Paper Award at the NMMVE2022 conference
Jan 2022 Honored with the title of "2021 Excellent Class Tutor of Shanghai Jiao Tong University"
Dec 2021 Excellence rankings in the 2021 Annual Class Tutors Assessment of SJTU
Oct 2021 The World's Top 2% Scientists by Stanford University
May 2020 Laureate of the 2020 IAAM Scientist Medal
Jun 2019 Excellence rankings in the 2018 Annual Faculty/Staff Assessment of SJTU
Jan 2019 Honored with the title of "2018 Excellent Class Tutor of Shanghai Jiao Tong University"
Dec 2018 Outstanding Contribution in Reviewing Award, Composite Structures, Elsevier
Jun 2018 Excellence rankings in the 2017 Annual Faculty/Staff Assessment of SJTU
Nov 2017 Winner of the Best Paper Award at the 13th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2017)
Jul 2017 Awarded the "Shanghai Pujiang Scholar" by the Shanghai Municipality
Dec 2016 Outstanding Contribution in Reviewing Award, Composite Structures, Elsevier
Jul 2016 Nominee of the Pierre Bézier Doctoral Dissertation Award
Jun 2015 Winner of the Best Paper Award at the 2015 International Symposium on Green Manufacturing and Applications (ISGMA2015)
May 2015 European Scholarship of Alumni Association of Zhejiang University in France
May 2015 Excellent Master Thesis Award of Shanghai City, P.R.China
Sep 2013 National Government Study Abroad Scholarship, P.R.China
Mar 2013 Excellent Graduate Award of Shanghai City, P.R.China
Dec 2012 National Graduate Scholarship of P.R.China
Dec 2012 Second Prize in National Post-Graduate Mathematical Contest in Modeling
Nov 2012 Awarded as "Gold Information Commissioner" of Shanghai Jiao Tong University Library
Oct 2012 Tang You Shu Qi Scholarship of Shanghai Jiao Tong University

ORCID HOMEPAGE